Husqvarna PG530 manuel dutilisation Maintenance, Grinding heads, CONVENTIONAL/DEMOLITION Heads

Page 21

Maintenance

Maintenance

Used correctly, the machine is an extremely low-maintenance and reliable.

The interrelation between the above four components enables a dynamic system which is both robust and flexible.

The head pins are fixed to the head plate giving rigidity and stability. The head mate is situated above the head plate and is held in place by a series of holes – head pin holes.

This section covers the general maintenance items that need attention on a periodic basis.

There are three main mechanical items to check:

1.Grinding Heads.

2.Planetary drive system.

3.Planetary seal.

Grinding heads

There are 2 different grinding head options:

1.Conventional/Demolition heads—designed for heavy duty preparation grinding where an extremely robust system is required.

2.Spring steel head system—designed more for finish- ing or lighter grinding applications.

CONVENTIONAL/DEMOLITION HEADS

The below diagram illustrates the main parts compris- ing this type of grinding head.

1.1.

 

2.

 

2.

1.

Head mate

1.

Head plate

2.

Head pin hole

2.

Head pins

Between the head plate and head mate are 3 white silicone springs which facilitate shock absorption and flexibility in the system.

The head pins are able to move within the head pin holes, creating a shock absorber type system similar to that in most motor vehicles.

Over an extended period of time, the head pin holes wear open. Along with this, the head pins wear and reduce in diameter. This combined wearing of the two creates excessive movement or “slop” within the grind- ing heads. This “slop” will eventually cause vibration whilst the machine is operating.

Routine checks for slop in the grinding heads are recommended. Life expectancy for grinding heads can vary between 6 and 12 months depending on amount of usage.

Replacement heads are available and simply bolt into place when the old ones are removed.

1.

2.

4.

3.

1.Head mate

2.Head plate

3.Head lock

4.Head spring

22 - English

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Manual de instrucciones Operator’s manualBedienungsanweisung Manuel d’utilisationEnglish ContentsKey to symbols Safety Instructions Introduction TransportationStorage What is what Control panel Setting up/Operation Powering up machineSetting Speed and direction FWD REVDirection of rotation Preparation Changing the diamondsProtection/Diagnostic Protection FunctionalKeypad/Display Monitor screen Information provided Variable speed drives/frequency convertersMenus and information they provide Fault HistoryFault Code Possible Cause Action Faults and trouble shootingOnto Problem Possible Cause Potential SolutionBackground DiamondsGeneral Principles Summary of diamond principlesGrinding disc set-up Diamond selectionHALF-SET of Diamonds Full and half sets of diamondsFULL-SET of Diamonds Application Full set is best Half set is bestSoft Selecting the correct diamonds for your applicationMedium HardDetermining the hardness of concrete Maintenance Grinding headsCONVENTIONAL/DEMOLITION Heads Diagram Grinding Heads Drive SystemPlanetary Drive System Remove this bolt Maintenance schedule Action Frequency Maintenance scheduleTechnical Data Technical DataEC-declaration of conformity

PG530 specifications

The Husqvarna PG530 is a powerful and versatile floor grinding machine designed for professional contractors and heavy-duty applications. This equipment is ideal for preparing and finishing various types of surfaces, including concrete, terrazzo, and natural stone. Built with advanced technologies and rugged construction, the PG530 stands out in the market for its reliability and performance.

One of the key features of the Husqvarna PG530 is its unique three-disc design, which provides efficient grinding performance. The three grinding heads allow for better distribution of weight and improved balance, ensuring an even grind across the floor. With a wide grinding width of 21 inches, the PG530 can cover large surface areas quickly, making it an efficient choice for both small projects and larger commercial jobs.

The machine is powered by a robust 15 HP motor, delivering ample power to tackle tough grinding tasks. It also features adjustable grinding pressure, allowing users to optimize the pressure according to the specific requirements of the job. This adaptability makes the PG530 suitable for a wide range of applications, from light surface preparation to heavy-duty grinding and polishing.

Additionally, the PG530 is equipped with Husqvarna's patented Dual Drive Technology. This innovative system provides independent speed control for both the grinding heads and the machine's forward movement. This capability allows operators to adjust the speed of the grinding discs while controlling the speed of the machine itself, resulting in enhanced flexibility and control during operation.

The machine is designed with user comfort in mind. Its ergonomic handle and adjustable working height make it easy to operate for extended periods without causing fatigue. The PG530 is also fitted with an integrated dust collection system, helping to maintain a clean working environment by minimizing dust and debris. This feature is essential for safety and compliance with health regulations.

In terms of usability, the PG530 is easy to transport and set up, making it a practical choice for contractors on the go. Its compact footprint ensures that it can maneuver in tight spaces, while the folding handle allows for easy storage.

Overall, the Husqvarna PG530 combines powerful performance, innovative technology, and user-friendly design to meet the demands of flooring professionals. Whether for surface preparation, grinding, or polishing, the PG530 is a reliable tool that enhances productivity and delivers superior results.
Top Page Image Contents