Grizzly H2854 Installing Bits, Inserting collet Collet Nut Spindle Shaft Lock Pin

Page 10

Installing Bits

!Disconnect power to the machine when perform-

ing any maintenance, assembly or adjust- ments. Failure to do this may result in serious personal injury.

The Model H2854 is supplied with a 1⁄4" collet for use with all 1⁄4" router bits. To install a bit:

1.Remove the collet nut from the spindle shaft using the supplied open-end wrench, while pressing the spindle shaft lock pin.

2.Once the collet nut is removed, you will be able to insert the 1⁄4" collet into the spindle shaft as shown in Figure 3.

3.Be careful not to let the collet fall onto the floor. Damage to the collet could occur.

4.Press the spindle shaft lock pin and thread the collet nut onto the spindle shaft as shown in Figure 4. The router bit should not be inserted into the collet at this time. Be sure not to cross the threads when starting the col- let nut onto the spindle shaft. Do not tighten the collet nut more than several turns at this time.

5.Insert the shaft of a 1⁄4" router bit into the col- let. Be sure to follow the router bit manufac- turer’s directions regarding how far the bit shaft must be inserted into the collet for safe operation.

6.Once the bit is inserted into the collet, press the spindle shaft lock pin and continue to tighten the collet nut with the supplied open- end collet wrench as shown in Figure 5.

NOTICE

When the collet nut is removed from the spindle shaft, take care to prevent the collet from dropping onto the floor. The collet may become damaged if it is dropped, causing it to not secure router bits properly.

-8-

Collet

Figure 3. Inserting collet.

Collet Nut

Spindle Shaft

Lock Pin

Figure 4. Threading collet nut onto spindle.

Figure 5. Tightening bit into router.

H2854 1 H.P. Variable Speed Plunge Router

Page 9 Page 11
Image 10
Page 9 Page 11
Contents P. Variable Speed Plunge Router Page Table Of Contents Safety Safety Instructions For Power ToolsLength AMP Rating 110V Operation Circuit RequirementsExtension Cords Introduction CommentaryUnpacking Piece InventoryBeginning Assembly AssemblyHandles Installing Bits Inserting collet Collet Nut Spindle Shaft Lock PinDust Collection Depth Stop Adjustments Spindle R.P.MPlunge Lock Lever Test Run OperationsGeneral Attachments Guide BushingEdge Guide Maintenance LubricationClosure H2854 1 H.P. Variable Speed Plunge Router Warranty and Returns Warranty Card Grizzly INDUSTRIAL, INC

H2854 specifications

The Grizzly H2854 is a versatile and powerful wood lathe designed for both professional woodworkers and hobbyists who seek precision and efficiency in their turning projects. With a robust construction and a range of advanced features, the H2854 ensures high-quality results while enhancing user experience.

One of the standout features of the Grizzly H2854 is its variable speed control, allowing users to adjust the speed from 600 to 2400 RPM. This flexibility enables woodturners to work with various materials and achieve optimal turning conditions for each project. The digital readout provides easy monitoring of speed settings, ensuring accuracy and consistency during operations.

The H2854 is equipped with a 1 HP motor, providing strong power to handle even the most demanding tasks. This higher power rating allows for efficient removal of material while maintaining smooth operation. Additionally, the lathe is designed with a heavy-duty cast iron bed, which minimizes vibration and enhances stability, ensuring a smoother cutting experience.

For convenience and versatility, the Grizzly H2854 features a quick-release tailstock and a sturdy tool rest that can be easily adjusted to accommodate different sizes and shapes of workpieces. The tailstock offers a reliable, robust design that facilitates easy alignment for drilling operations. Users appreciate the ease of adjustments, which promotes efficiency during setups between various turning operations.

Moreover, the H2854 has an impressive swing capacity of 12 inches over the bed and 20 inches over the ways, allowing for the turning of large bowls and other substantial pieces. The lathe’s length is ample, providing a 28-inch capacity, making it ideal for a variety of turning projects ranging from small spindle work to larger bowl turning.

Safety features are paramount in woodworking, and the Grizzly H2854 does not compromise in this regard. It includes a safety switch that prevents accidental starts and ensures that users can operate the machine with peace of mind. Additionally, the integrated dust port helps in maintaining a cleaner workspace by minimizing debris buildup.

Overall, the Grizzly H2854 is a powerful, user-friendly wood lathe that blends performance with reliability. Its main features, including variable speed control, a robust motor, and adjustable components, make it an essential tool for anyone serious about woodturning. Whether you are crafting intricate designs or creating functional pieces, the H2854 offers the precision and versatility needed for a broader range of woodworking endeavors.
Top Page Image Contents