Grizzly H2854 instruction manual Length AMP Rating

Page 5

Safety Instructions For Power Tools

9.USE PROPER EXTENSION CORD. Make sure your extension cord is in good condi- tion. Conductor size should be in accor- dance with the chart below. The amperage rating should be listed on the motor or tool nameplate. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Your extension cord must also contain a ground wire and plug pin. Always repair or replace exten- sion cords if they become damaged.

Minimum Gauge for Extension Cords

 

 

LENGTH

 

AMP RATING

25ft

 

50ft

 

100ft

0-6

18

 

16

 

16

7-10

18

 

16

 

14

11-12

16

 

16

 

14

13-16

14

 

12

 

12

17-20

12

 

12

 

10

21-30

10

 

10

 

No

 

 

 

 

 

 

10.WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry which may get caught in moving parts. Non-slip footwear is recommended. Wear protective hair cov- ering to contain long hair.

11.ALWAYS USE SAFETY GLASSES. Also use face or dust mask if cutting operation is dusty. Everyday eyeglasses only have impact resistant lenses, they are NOT safety glasses.

12.SECURE WORK. Use clamps or a vise to hold work when practical. It’s safer than using your hand and frees both hands to operate tool.

13.DO NOT OVER-REACH. Keep proper footing and balance at all times.

14.MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance. Follow instructions for lubri- cating and changing accessories.

15.USE RECOMMENDED ACCESSORIES. Consult the owner’s manual for recom- mended accessories. The use of improper accessories may cause risk of injury.

16.REDUCE THE RISK OF UNINTENTION- AL STARTING. On machines with magnet- ic contact starting switches there is a risk of starting if the machine is bumped or jarred. Always disconnect from power source before adjusting or servicing. Make sure switch is in OFF position before reconnecting.

17.MANY WOODWORKING TOOLS CAN “KICKBACK” THE WORKPIECE toward the operator if not handled properly. Know what conditions can create “kickback” and know how to avoid them. Read the manual accom- panying the machine thoroughly.

18.CHECK DAMAGED PARTS. Before fur- ther use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, bind- ing of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced.

19.NEVER LEAVE TOOL RUNNING UNAT- TENDED. TURN POWER OFF. Do not leave tool until it comes to a complete stop.

20.NEVER OPERATE A MACHINE WHEN TIRED, OR UNDER THE INFLUENCE OF DRUGS OR ALCOHOL. Full mental alert- ness is required at all times when running a machine.

21.NEVER ALLOW UNSUPERVISED OR UNTRAINED PERSONNEL TO OPER- ATE THE MACHINE. Make sure any instructions you give in regards to machine operation are approved, correct, safe, and clearly understood.

22.IF AT ANY TIME YOU ARE EXPERIENC- ING DIFFICULTIES performing the intend- ed operation, stop using the machine! Then contact our service department or ask a qualified expert how the operation should be performed.

H2854 1 H.P. Variable Speed Plunge Router

-3-

Page 4 Page 6
Image 5
Page 4 Page 6
Contents P. Variable Speed Plunge Router Page Table Of Contents Safety Instructions For Power Tools SafetyLength AMP Rating Extension Cords Circuit Requirements110V Operation Commentary IntroductionPiece Inventory UnpackingHandles AssemblyBeginning Assembly Inserting collet Collet Nut Spindle Shaft Lock Pin Installing BitsDust Collection Depth Stop Spindle R.P.M AdjustmentsPlunge Lock Lever General OperationsTest Run Guide Bushing AttachmentsEdge Guide Lubrication MaintenanceClosure H2854 1 H.P. Variable Speed Plunge Router Warranty and Returns Warranty Card Grizzly INDUSTRIAL, INC

H2854 specifications

The Grizzly H2854 is a versatile and powerful wood lathe designed for both professional woodworkers and hobbyists who seek precision and efficiency in their turning projects. With a robust construction and a range of advanced features, the H2854 ensures high-quality results while enhancing user experience.

One of the standout features of the Grizzly H2854 is its variable speed control, allowing users to adjust the speed from 600 to 2400 RPM. This flexibility enables woodturners to work with various materials and achieve optimal turning conditions for each project. The digital readout provides easy monitoring of speed settings, ensuring accuracy and consistency during operations.

The H2854 is equipped with a 1 HP motor, providing strong power to handle even the most demanding tasks. This higher power rating allows for efficient removal of material while maintaining smooth operation. Additionally, the lathe is designed with a heavy-duty cast iron bed, which minimizes vibration and enhances stability, ensuring a smoother cutting experience.

For convenience and versatility, the Grizzly H2854 features a quick-release tailstock and a sturdy tool rest that can be easily adjusted to accommodate different sizes and shapes of workpieces. The tailstock offers a reliable, robust design that facilitates easy alignment for drilling operations. Users appreciate the ease of adjustments, which promotes efficiency during setups between various turning operations.

Moreover, the H2854 has an impressive swing capacity of 12 inches over the bed and 20 inches over the ways, allowing for the turning of large bowls and other substantial pieces. The lathe’s length is ample, providing a 28-inch capacity, making it ideal for a variety of turning projects ranging from small spindle work to larger bowl turning.

Safety features are paramount in woodworking, and the Grizzly H2854 does not compromise in this regard. It includes a safety switch that prevents accidental starts and ensures that users can operate the machine with peace of mind. Additionally, the integrated dust port helps in maintaining a cleaner workspace by minimizing debris buildup.

Overall, the Grizzly H2854 is a powerful, user-friendly wood lathe that blends performance with reliability. Its main features, including variable speed control, a robust motor, and adjustable components, make it an essential tool for anyone serious about woodturning. Whether you are crafting intricate designs or creating functional pieces, the H2854 offers the precision and versatility needed for a broader range of woodworking endeavors.
Top Page Image Contents