Sanyo SC-X1801R instruction manual Maintenance

Page 7

Attention: To lock the front cover firmly, snick it softly until it sounds “Click” If the blockage is found in floor brush, hose or tubes and the machine, the machine can be re-operated only after the blockage is cleaned away completely.

This vacuum cleaner can be used as tip the rubbish out of the full dust cup.

Figure_1 Figure_2 Figure_3 Figure_4

Figure_5 Figure_6 Figure_7 Figure_8

Maintenance

CAUTION

Be sure to turn the power off and unplug the unit before cleaning.

1.Clear the dust: when the dust collect to the MAX label of the filter, rubbish shall be tipped from the dust barrel.

1)Press the front cover clip beside the suction socket and open the front cover.

2)Take out the dust cup and clean the dust away completely.

3)Clean the dust cup with warm water if necessary.

5

Image 7
Contents SC-X1801R Sanyo Vacuum Cleaner Precautions Page Introduction of Parts Vacuum Cleaner SC-X1801Use Instructions Maintenance Page Trouble Shooting Technical SpecificationHandy Cleaner SC-H24 To reassemble the unit If the dust box can not be Care of filter