
®
Self Help Guide
Next,
From the large white window select the option For ‘Internet Protocol (TCP/IP)’ Providing you Have administrative rights over the Computer the ‘Properties’ button should be highlighted.
Click on the ‘Properties’ button to continue. A screen similar to that shown left should appear.
Connectivity problems are often because the
Card has been set to ‘Use The Following IP
Address’ i.e. a Static IP Address.
Set the Card to ‘Obtain An IP Address Automatically’ and ‘Obtain DNS Server Address Automatically’ as shown here and then click the ‘OK’ button to save the changes.
Once the changes are affected you should test the connectivity again using ‘ipconfig’ in the black DOS Window as described before.
www.belkin.com | Page 71 of 81 |