Belkin TSG-UK-1-001 manual Troubleshooting Unable To Connect To The Belkin Router

®

Self Help Guide

Troubleshooting – Unable To Connect To The Belkin Router

If you are unable to open the Router’s User Interface (192.168.2.1) then the actual connectivity between PC and Router should be tested. To do this click on the ‘Start’ button, locate the ‘Run’ option and once the ‘Run’ command Window opens type ‘cmd’ into the entry field (as shown below) and then press ‘OK’ or hit ‘ENTER’.

NOTE: ‘cmd’ is simply an abbreviation of ‘command’ which older operating systems will use instead of the abbreviated form.

A Black DOS-Window should appear with a flashing cursor. Simply type in ‘ipconfig’ and press ‘ENTER’*.

*’ipconfig’ is an abbreviation of Internet Protocol Configuration – For older Operating Systems use ‘winipcfg’

TSG-UK-1-0081 www.belkin.com Page 41 of 81