Additional Safety Rules for For the ROUTER/SHAPER

ADDITIONAL SAFETY RULES FOR

FOR THE ROUTER/SHAPER

WARNING: FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS PERSONAL INJURY

1.	DO NOT OPERATE THIS MACHINE UNTIL it is
	assembled and installed according to the
	instructions.
2.	OBTAIN ADVICE from your supervisor, instructor,
	or another qualified person if you are not familiar

21.USE A HEAVY WORKPIECE when shaping with starting pin and collar(s). DO NOT SHAPE a short, light workpiece against the collar(s) (Figs. D and E).

	with the operation of this machine.
3.	FOLLOW ALL WIRING CODES and recommended
	electrical connections.
4.	NEVER turn the machine “ON” before clearing the
	table of all objects (tools, scraps of wood, etc.).
5.	AVOID awkward hand positions. A sudden slip

RIGHT

CUTTER COLLAR

Fig. D

	could allow the hand to contact the cutter.
6.	KEEP hands away from cutter.
7.	NEVER START THE MACHINE with the workpiece
	contacting the cutter.

WRONG

CUTTER COLLAR

Fig. E

8. NEVER reach under the table while the machine is
	running.
9. KEEP cutters sharp and free from rust and pitch.
10.	NEVER ADJUST THE FENCE while the machine is
	running.
11.	ADJUST THE FENCE HALVES so that the cutter
	opening is never more than is required to clear the
	cutter.
12.	LOCK THE FENCE HARDWARE after making fence
	adjustments.
13.	PROPERLY SECURE THE CUTTERS before
	starting the machine.
14.	DO NOT perform any operation freehand. Use the
	fence for straight shaping, the miter gauge for edge
	shaping, and the starting pin and rub collars for
	curve shaping.
15.	KEEP THE FRONT MOTOR ACCESS PANEL
	CLOSED while operating the machine.
16.	USE GUARDS provided with the machine.
17.	DO NOT feed a workpiece that is warped, contains
	knots, or is embedded with foreign objects, (nails,
	staples, etc.).
18.	NEVER run the workpiece between the fence and
	the cutter.
19.	USE A MITER GAUGE and a clamp attachment
	when edge shaping work less than 3" wide. Remove
	the fence during this operation.
20.	PROVIDE SUFFICIENT BEARING surface when
	shaping with a starting pin and collar(s) (Figs. B and
	C).

CUTTER

COLLAR

RIGHT	SUFFICIENT
	BEARING SURFACE

Fig. B

CUTTER

COLLAR

WRONG		INSUFFICIENT
		BEARING SURFACE

	Fig. C

22.POSITION THE CUTTER below the collar(s) when shaping with starting pin and collar(s) (Fig. F).

COLLAR	WORK
CUTTER	TABLE

Fig. F

23. FEED WORKPIECE against cutter rotation (Fig. G).

CUTTER ROTATION

FEED

Fig. G

24.NEVER PERFORM LAYOUT, assembly, or set-up work on the table while the machine is running.

25.TURN THE MACHINE “OFF” AND DISCONNECT THE MACHINE from the power source before installing or removing accessories, before adjusting or changing set-ups, or when making repairs.

26.TURN THE MACHINE “OFF”, disconnect the machine from the power source, and clean the table/work area before leaving the machine. LOCK THE SWITCH IN THE “OFF” POSITION to prevent unauthorized use.

27.ADDITIONAL INFORMATION regarding the safe and proper operation of this machine is available from the Power Tool Institute, 1300 Summer Avenue, Cleveland, OH 44115-2851. Information is also available from the National Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-3201. Please refer to the American National Standards Institute ANSI 01.1 Safety Requirements for Woodworking Machines and the U.S. Department of Labor OSHA 1910.213 Regulations.

SAVE THESE INSTRUCTIONS.

Refer to them often

and use them to instruct others.

SH100 specifications

Delta SH100 is a cutting-edge smartphone that stands out in the crowded mobile device market with its impeccable design, advanced features, and innovative technology. Targeted at tech-savvy consumers, the device offers a seamless blend of performance and style, making it an excellent choice for both professional and personal use.

One of the standout features of the Delta SH100 is its sleek and modern design. Crafted with a high-quality glass and aluminum frame, the device exudes elegance and durability. The phone is equipped with a large 6.5-inch Full HD+ AMOLED display that brings vibrant colors and sharp contrasts to life, enhancing the viewing experience for videos, games, and everyday tasks.

Under the hood, the Delta SH100 is powered by an octa-core processor, ensuring fast performance and efficient multitasking. With 8GB of RAM and up to 256GB of internal storage, users can enjoy smooth operation while running multiple applications without any lag. Additionally, the device supports expandable storage via a microSD card slot, allowing for even more flexibility.

Photography enthusiasts will appreciate the advanced triple-camera system on the Delta SH100. The primary 64MP wide-angle lens captures stunning images with incredible detail, while the 12MP ultra-wide lens enables users to capture sweeping landscapes and group shots. A 5MP macro lens adds versatility for capturing close-up details. With features like night mode, AI enhancements, and various shooting modes, taking professional-quality photos is easily attainable.

The smartphone also boasts impressive battery life, equipped with a powerful 5000mAh battery that supports fast charging technology. Users can enjoy extended usage without constantly worrying about recharging. The Delta SH100 runs on the latest Android operating system, providing users access to a plethora of applications and services via the Google Play Store.

Safety and security are paramount in today’s digital age, and the Delta SH100 addresses this with multiple biometric authentication options, including a fingerprint sensor and facial recognition technology. This ensures that user data remains secure while also providing convenient access to the device.

In conclusion, the Delta SH100 combines a stunning design, powerful hardware, advanced camera technology, and essential security features, making it a top choice for anyone in the market for a premium smartphone. With its focus on performance and user experience, the Delta SH100 is poised to make a significant impact in the mobile device arena.