Cisco Systems Cisco 1712, Cisco 1711 manual Wall-Mounting, Wall-Mount Brackets-Bottom of Router

Chapter 2 Installation

Optional Installation Steps

Step 2 Connect the DB-9 end of the cable to the DB-9 end of the DB-9-to-DB-25 adapter.

Step 3 Connect the DB-25 end of the adapter to the modem.

Wall-Mounting

The Cisco 1711 and Cisco 1712 Security Access routers can be wall-mounted using two number six, 3/4-inch screws and the molded mounting brackets on the bottom of the hub, as shown in Figure 2-7. You must provide the screws. We recommend using pan-head or round-head screws.

Figure 2-7 Wall-Mount Brackets—Bottom of Router

Front panel of router

Mounting bracket

3.75"

Bottom(9.52 cm) of router

Mounting bracket

Mounting bracket

Mounting bracket

12016

To mount the router on a wall or other surface:

Step 1 Install the two screws 3.75 inches (9.52 centimeters) horizontally apart on a wall or other vertical surface.

The screws should protrude 0.25 inch (0.64 centimeter) from the surface of the wall.

	Cisco 1711 and Cisco 1712 Security Access Routers Hardware Installation Guide
2-14	OL-4050-02