Cisco Systems ASR 903 manual Crimping a Ground Lug onto the Ground Wire

Chapter 3 Installing the Cisco ASR 903 Router

Installing the Chassis Ground Connection

Step 3 Using a crimping tool (as specified by the ground lug manufacturer), crimp the ground lug to the ground wire as shown in Figure 3-10.

Figure 3-10 Crimping a Ground Lug onto the Ground Wire

	60529
Step 4	Use a Phillips head screwdriver to attach the 2-hole ground lug and wire assembly to the router with the
	2 pan-head Phillips head screws. For a 19-inch EIA rack, attach the 2-hole ground lug to the rear of the
	router.
Step 5	Connect the other end of the ground wire to a suitable grounding point at your site.

Cisco ASR 903 Router Hardware Installation Guide

OL-25178-04 3-7