Cisco Systems ASR 903 manual Pinouts

Contents

				Connecting Cables to a GPS Interface							3-38
				Connecting Ethernet Cables				3-39
				Connecting Cables to SFP Modules					3-40
				Connecting T1/E1 cables			3-40
				Installing the Cable Connector					3-40
				RJ45 Cable Pinouts			3-41
				Connecting Cables to the Patch Panel							3-41
				Recommended Patch Panel 3-42
				Connecting the Fan Tray Alarm Port					3-42
				Connector and Cable Specifications					3-43
				Cisco ASR 903 Router Initial Configuration
C H A P T E R		4								4-1
				Checking Conditions Prior to System Startup						4-1
				Powering Up the Cisco ASR 903 Router					4-2
				Verifying the Front Panel LEDs				4-5
				Verifying the Hardware Configuration						4-5
				Checking Hardware and Software Compatibility								4-5
				Configuring the Cisco ASR 903 Router at Startup							4-5
				Using the Console Interface				4-6
				Configuring Global Parameters				4-6
				Checking the Running Configuration Settings								4-7
				Saving the Running Configuration to NVRAM								4-7
				Safely Powering Off the Cisco ASR 903 Router							4-8
				Troubleshooting
C H A P T E R		5			5-1
				Pinouts 5-1
				BITS Port Pinout		5-1
				GPS Port Pinout		5-2
				Time of Day Port Pinout			5-2
				Alarm Port Pinout		5-3
				Console/Aux RJ45 RS232 Serial Port Pinout							5-3
				T1/E1 Port Pinout		5-4
				Management Ethernet Port Pinout					5-5
				USB Console Port Pinout			5-6
				USB Flash/MEM Port Pinout				5-6
				Fiber-Optic Specifications			5-6
				LED Summary	5-7
				RSP LEDs	5-7
				Interface Module LEDs			5-8
			Cisco ASR 903 Router Hardware Installation Guide
	vi											OL-25178-04