Operating Instructions Operation | Black & Decker BDCMTR guide

OPERATING INSTRUCTIONS

WARNING: Shock hazard. Under no circumstances should this product be used near water.

WARNING: To reduce the risk of injury, turn off and remove battery from tool or disconnect plug from power source before making any adjustments or removing or installing attachments or accessories.

WARNING: Risk of lacerations or burns. Do not touch work piece or bit immediately after operating the tool. They can become very hot. Handle carefully. Always allow accessories and workpiece to cool before handling.

NOTE: Refer to Power Unit instruction manual before operating this tool for all safety warnings and details on installing and removing attachments.

OPERATION

•To switch the tool on, press and hold the active lock-off button (3), then fully press the variable speed switch on the power unit. Once the bit begins to operate, release the active lock-off button (3).

•To switch the tool off, release the variable speed switch.

NOTE: Operate the router at full speed at all times.

NOTE: This attachment only operates in the forward direction, the forward/reverse slider of the Power Unit should not be able to be switch to reverse.

INSTALLING AND REMOVING A ROUTER BIT

WARNING: To reduce the risk of injury, turn off and remove battery from tool or disconnect plug from power source before making any adjustments or removing or installing attachments or changing bits. Failure to do so could result in accidental starting and possible injury.

BIT INSTALLATION AND REMOVAL (FIG. B)

NOTES:

•ROUTER IS NOT RECOMMENDED FOR USE WITH RAISED PANEL BITS.

•ROUTER IS NOT RECOMMENDED FOR USE IN METAL CUTTING APPLICATIONS.

•DO NOT USE ANY ROUTER BIT GREATER THAN 1-3/8” DIAMETER. USE PILOT (BALL BEARING) ROUTER BITS FOR EDGE PROFILE CUTTING.

CAUTION: ROUTER BITS ARE SHARP, USE CARE WHEN HANDLING THEM. INSTALLING BITS

	WARNING: Turn the router off and remove	B	Spindle lock button
battery from tool or disconnect plug from power		B
battery from tool or disconnect plug from power
source.
The router is equipped with a spindle lock feature
that makes changing bits easy.Lock the spindle
shaft by depressing the spindle lock button as
shown in figure B and use the supplied wrench to
loosen (counterclockwise) the collet nut (4).
•	Keep the spindle lock button (2) depressed and
	rotate the spindle until the spindle lock fully engages.
• Place the router upside down on a smooth, flat surface.
•	Loosen the collet nut (4) using the wrench provided.
•	Insert the shank of the router bit into the collet (4).
•	When installing router bits, be sure they are
	inserted as far as possible and then pulled out
•	about 1/16” (1.5mm).
•	Keep the spindle lock button (2) depressed and tighten the collet nut (4) clockwise (do not over-
	tighten)using the wrench provided.

NOTE: If the router base is set at its maximum depth, the collet nut cannot be tightened properly. Always insure that if the router base is adjusted to its maximum depth it must be backed off several rotations (counterclockwise) before tightening or loosening router bits. See “Setting the Router Depth” below for router base adjustment.

BDCMTR specifications

The Black & Decker BDCMTR is a versatile and powerful tool designed for both professionals and DIY enthusiasts. This multi-tool is truly a game-changer, offering a wide range of applications that can meet various project needs. One of its most attractive features is its interchangeable heads, allowing users to switch between sanding, cutting, and scraping attachments effortlessly. This adaptability makes the BDCMTR ideal for completing tasks ranging from detailed woodworking to minor home repair jobs.

Equipped with a robust motor, the BDCMTR ensures efficient operation, delivering consistent power across different applications. Its variable speed settings provide users with enhanced control, enabling them to tailor the speed based on the material being worked on. Whether you're dealing with delicate projects that require a gentle touch or tougher tasks that demand power, this multi-tool adjusts to your needs.

The BDCMTR is also designed with user comfort in mind. Its lightweight construction and ergonomic grip reduce user fatigue, allowing for prolonged use without discomfort. This is especially beneficial for extended projects where multiple tasks are performed in succession. Users will appreciate its compact size, which facilitates easy maneuverability in tight spaces, making it ideal for intricate work.

Another notable aspect of the Black & Decker BDCMTR is its compatibility with a wide range of accessories. This feature broadens its functionality, as it can be used with various blades and sanding pads from other brands. This level of compatibility ensures users have the flexibility to choose the accessories that best suit their specific projects.

Safety is paramount with the BDCMTR, which includes protective features designed to prevent accidental starts and enhance user safety during operation. Additionally, the dust collection system helps maintain a cleaner workspace, minimizing debris that could hinder visibility and performance.

In summary, the Black & Decker BDCMTR stands out for its versatility, powerful performance, user-friendly design, and compatibility with numerous accessories. It is an ideal choice for anyone looking for a reliable multi-tool that can tackle a variety of tasks with ease. Whether you are a seasoned professional or a weekend warrior, the BDCMTR is designed to meet your needs effectively and efficiently.