Black & Decker BDCMTR instruction manual Controls, Removing Bits, Setting the Routing Depth FIG. C

Page 5

CAUTION: NEVER TIGHTEN COLLET NUT WITHOUT A 1/4” SHANK SIZE BIT INSERTED INTO COLLET. TO DO SO MAY BREAK OR DAMAGE COLLET.

REMOVING BITS

CAUTION: Burn hazard. Router bits get hot during use. Allow sufficient time for bit to cool before replacing.

• Keep the spindle lock button (2) depressed.

• Place the router upside down on a smooth, flat surface.

• Loosen (counterclockwise) the collet nut (4) using the wrench provided.

• Release button and remove bit.

CONTROLS

WARNING: To reduce the risk of injury, do not overload the tool. Let it work at its own pace.

WARNING: To reduce the risk of injury, turn off and remove battery from tool or disconnect plug from power source before making any adjustments or removing or installing attachments or accessories.

SETTING THE ROUTING DEPTH (FIG. C)

C

WARNING: Turn the router off and

 

remove battery from tool or disconnect plug

 

from power source.

 

1. Keep the spindle lock button (2) depressed

 

and rotate the router base (8) as shown in

 

figure C. Rotating the base clockwise will

 

increase the routing depth while rotating the

 

basecounterclockwise will decrease the depth.

 

Two complete revolutions of the base equals

 

about 2 millimeters.

 

2. After obtaining the desired routing depth,

 

release the spindle lock button (2). Continue

 

turning the base until the notch under the spindle lock button aligns with the next closest

locking slot in the depth of cut scale (6).

 

USING THE ROUTER (FIG. D & E)

1. Make sure that the material to be cut is clamped down and is stable enough to support the router during operation.

2. Use both hands on the power unit to control the router, and run the router at full speed at all times. See figure D.

3. Move the router counterclockwise when cutting outside edges. Move clockwise when cutting inside edges. See figure E.

DE

Bit Rotation ( View from top of router)

Router travel should follow arrows

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Bdcmtr Router AttachmentSpecific Safety Rules Use proper eye protection Use proper hearing protection SymbolsInstalling and Removing a Router BIT BIT Installation and Removal FIG. BBattery from tool or disconnect plug from power Source Operating Instructions OperationUsing the Router FIG. D & E Setting the Routing Depth FIG. CControls Removing BitsMaintenance TroubleshootingAccessories Feeding Speed and Rate of CUTFor Service & Sales Service Information Full TWO-YEAR Home USE WarrantySee ‘Tools-Electric’ Yellow PagesMode D’EMPLOI Page Conserver CES Directives SymbolesFonctionnement Installation ET Retrait DE LA Fraise FIG. BFonctionnement Insertion ET Retrait D’UNE FraiseInstallation DES Fraises CommandesRéglage DE LA Profondeur DE Toupillage FIG. C Utilisation DE LA Toupie FIG. D & EAccessoires Problème Cause possible Solution possibleDépannage Conseils Pour Optimiser L’UTILISATIONPage Manual DE Instrucciones Page Símbolos Operación Conserve Estas InstruccionesDescripción Funcional FuncionamientoControles Instalación DE BrocasAdvertencia Apague la rebajadora y quite USO DE LA Rebajadora Figuras D Y E Detección DE ProblemasVelocidad DE Avance Y DE Corte Consejos Para UN USO ÓptimoReemplazo DE LAS Etiquetas DE Advertencia AccesoriosPage Esta Garantia no Aplica Cuando Product Infomation · Identificación DEL ProductoSolamente Para Propositos DE Mexico

BDCMTR specifications

The Black & Decker BDCMTR is a versatile and powerful tool designed for both professionals and DIY enthusiasts. This multi-tool is truly a game-changer, offering a wide range of applications that can meet various project needs. One of its most attractive features is its interchangeable heads, allowing users to switch between sanding, cutting, and scraping attachments effortlessly. This adaptability makes the BDCMTR ideal for completing tasks ranging from detailed woodworking to minor home repair jobs.

Equipped with a robust motor, the BDCMTR ensures efficient operation, delivering consistent power across different applications. Its variable speed settings provide users with enhanced control, enabling them to tailor the speed based on the material being worked on. Whether you're dealing with delicate projects that require a gentle touch or tougher tasks that demand power, this multi-tool adjusts to your needs.

The BDCMTR is also designed with user comfort in mind. Its lightweight construction and ergonomic grip reduce user fatigue, allowing for prolonged use without discomfort. This is especially beneficial for extended projects where multiple tasks are performed in succession. Users will appreciate its compact size, which facilitates easy maneuverability in tight spaces, making it ideal for intricate work.

Another notable aspect of the Black & Decker BDCMTR is its compatibility with a wide range of accessories. This feature broadens its functionality, as it can be used with various blades and sanding pads from other brands. This level of compatibility ensures users have the flexibility to choose the accessories that best suit their specific projects.

Safety is paramount with the BDCMTR, which includes protective features designed to prevent accidental starts and enhance user safety during operation. Additionally, the dust collection system helps maintain a cleaner workspace, minimizing debris that could hinder visibility and performance.

In summary, the Black & Decker BDCMTR stands out for its versatility, powerful performance, user-friendly design, and compatibility with numerous accessories. It is an ideal choice for anyone looking for a reliable multi-tool that can tackle a variety of tasks with ease. Whether you are a seasoned professional or a weekend warrior, the BDCMTR is designed to meet your needs effectively and efficiently.
Top Page Image Contents