Cisco Systems 80O SERIES manual Installation Verifying Installation

Page 42

Chapter 2 Installation

Verifying Installation

Figure 2-12 Mounting Router on Wall

1.Secure two screws 758 inches (19.35 cm) apart in a wall and 18 in. (0.32 cm) from

the wall.

.35

	5	in	.	(19
			.

7	8

cm)

Wall-mount screw

Front panel

Wall

Wall-mount screw

18 in. (0.32 cm)

Wall

Screw

Mounting brackets

2. Hang router on screws.

11672

Maximum distance 6 ft (18 m)

3.Place power supply on horizontal surface.

Verifying Installation

Verify the cable connections (links) by checking the LEDs listed in Table 2-4. If the LEDs are not on, see Chapter 3, “Troubleshooting.”

The LINK LED is on the back panel of Cisco 801 and Cisco 802 routers.

Cisco 800 Series Routers Hardware Installation Guide

2-20	78-5373-04

Image 42

Contents Cisco 800 Series Routers Hardware Installation Guide Page Cisco 800 Series Routers Hardware Installation Guide Page N T E N T S Mounting on a Table Conventions AudienceOrganization ViiViii Documentation DVD Obtaining DocumentationCisco.com Ordering DocumentationReporting Security Problems in Cisco Products Documentation FeedbackCisco Product Security Overview Obtaining Technical Assistance Cisco Technical Support WebsiteObtaining Additional Publications and Information Submitting a Service RequestDefinitions of Service Request Severity XiiXiii Xiv Overview Feature Summary Feature Routers DescriptionRouter Ports Summary Front PanelsRouter Ethernet Ports Isdn Ports Telephone Ports Back Panels Link LED Ethernet port Isdn BRI S/T portCisco 802 Router Back Panel Cisco 804 Router Back Panel LEDs Color FunctionCH1 TXD CH1CH1 RXD CH2Installation Safety European Union StatementsPreventing Electrostatic Discharge Damage Network Termination Point StatementIsdn S/T Ports Statement Preinstallation Activities Preventing Router DamageUnpacking Your Router Installing Your Router Device Connecting Ethernet DevicesNetwork Network Device Ethernet CableConnected to Router Router Port Type Button Setting Connecting Hubs Connecting a Server, PC, or Workstation Connecting an Isdn Line Connecting an Isdn Line to Cisco 801 and Cisco 803 RoutersNT1 Connecting an Isdn Line to Cisco 802 and Cisco 804 Routers Connecting an Idsl Line IsdnConnecting a Digital Telephone Connecting the Idsl Cable to Cisco Idsl RoutersConnecting an Analog Telephone, Fax, or Modem Vendor Name Product Name For More Information Connecting a Terminal or PC Connecting Terminal or PCConnecting the Power Supply Mounting Your RouterMounting on a Table Mounting on a Wall 11 Wall-Mounting Brackets Bottom of RouterVerifying Installation Installation Verifying InstallationPower/Link LEDs To Check Normal Patterns Where to Go from Here Troubleshooting Problems During First Startup Symptom Problem SolutionsTo HUB/TO PC Problems After First StartupSymptom LINE, CH1, CH1 RXDCorrectly, see the Connecting a Digital Problems After Router Is Running CH1, CH1 RXD, CH1 TXD CH1 RXD, CH1 TXD, CH2When Contacting Your Cisco Reseller Page Isdn and Idsl Concepts Page System Specifications Description Design SpecificationButton OUT Pin Position Port Connector PinoutsTX+ RX+ RX+ TX+Button Pin OUT Position Pin FunctionRTS DTR TXD GND RXD DSR CTS TXD+ RXD+ TipCabling Specifications ROF RTNType Category Shielding Ethernet Cable SpecificationsMaximum Cable Distances 10BASE-TPage Numerics GL-1GL-2 GL-3 GL-4 D E IN-1Modem, connecting Mounting the router IN-2Illustrated Settings Troubleshooting IN-3IN-4