ADDITIONAL RULES FOR SAFE OPERATION cont.
7o ALWAYS check the tool for damaged parts. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine if it will operate
properly and perform its intended function. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool's
operation. A guard or other part that is damaged should be properly repaired or replaced at a Sears Service Center,.
8. INSPECT and remove all nails from lumber before routing.
9, SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to instruct others who may use this toot. If someone borrows this tool, make sure they have these instructions also.
Z_ WARNING: Your router should NEVER be connected to the power source when you are assembling parts, making adjustments, installing or removing collets / nuts, cutter bits, cleaning or when it is not in use. Disconnecting the router will prevent accidental starting, which could cause serious personal injury.
When unpacking the box don'tdiscard any packing materials until all of the contents are accounted for:
1_ Carefully lift the Router Motor and Fixed Base with the
2.Open the parts bag to locate the following:
•Sawdust Extraction Hood and 2 Screws used to attach hood to base
•1/4-in. Collet/Nut
•Collet/Nut wrench
3o Inspect the items carefully to make sure that no breakage or damage has occurred during shipping° If any of the items mentioned are missing, (refer to "PARTS LIST" illustration on page 1t), return the router to you r nearest Sears store or Craftsman outlet to have the router replaced°
Z_ WARNING: If any parts are broken or missing, DO NOT attempt to plug in the power cord or operate router until the broken or missing parts are replaced. Failure to do so could result in possible serious injury.
10