Craftsman 320.17541 Chip shield deflector is not intended as a safety guard, Tabs

CHIP SHIELD DEFLECTOR (Fig, 18)

_-_ WARNING: ALWAYS wear eye protection.

The chip shield deflector is not intended as a safety guard.

To remove chip shield from fixed base, press inward on tabs until chip shield releases from base and remove it To attach, place chip shield back in position and flex sides while pushing it in until it snaps back into place (See Fig. 18).

Fig. 18 Tabs

t z_ WARNING: The chip shield deflector helps keep dust and chips away from the operator; it will not stop objects larger than woodchips thrown from the bit.

CAUTION: ALWAYS have the chip shield deflector in place on the base when operating the router,

Z_ WARNING: ALWAYS turn motor off and unplug router from power source before making any adjustments or installing accessories. Failure to turn motor off and unplug router could result in accidental starting which can cause serious personal injury.

DUST COLLECTION WITH DUST EXTRACTION HOOD

There is a dust extraction hood included with this router.The hood is sized to

accept a lib-in,vac hose adapter, sold separately,

To attach the hood onto the fixed base,

position and secure it to the back of the base with the two screws (included) as shown

in Fig. 19,

Fig. 19

(Fig. 19)

2 screws included

29