Chicago Electric 95380 operating instructions To Connect a Vacuum Hose To The Dust Port

Page 11

To Connect A Vacuum Hose To The Dust Port:

DUST PORT

(1-3/8” OUTSIDE DIAMETER)

Figure C

The Dust Port of the Router Table is 1-3/8” O.D. (outside diameter) and is located at the rear of the Router Table. Use an automotive hose clamp (not included) to secure an appropriate size vacuum hose (not included) to the Dust Port.

(See Figure C.)

The Router Table Power Switch/Outlets Assembly:

POWER SWITCH

SAFETY KEY

Figure D

1.The Power Switch/Outlets (2B) assembly is equipped with a Safety Key to help prevent unauthorized use of the Router Table. (See Figure D.)

2.To provide power to the Router Table, connect the Power Cord/Plug of the Power Switch/Outlets assembly to the nearest 110 volt, grounded, electrical outlet. Insert the Safety Key into the Power Switch (2B), and pull up on the Power Switch to provide power to the Router Table (and Router). To shut off power to the Router Table (and Router), push down on the Power Switch and remove the Safety Key. Make sure to store the Safety Key in a safe location, out of reach of children and other unauthorized people. (See Figure D.)

3.The Power Switch/Outlets (2B) assembly also provides two 110 volt, grounded, electrical outlets with which to provide electrical power to the Router and/or another electrically powered tool.

SKU 95380

For technical questions, please call 1-800-444-3353

PAGE 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Router Table with Router For technical questions or replacement parts, please callWork Area SpecificationsGeneral Safety Rules Save this ManualPersonal Safety Electrical SafetyTool USE and Care ServiceIndustrial applications must follow Osha guidelines Specific Safety RulesPage Grounding Improperly connecting the groundingWire can result in electric shock See Outlets for 2-Prong Plug UnpackingSee 3-Prong Plug and Outlet Prong Plug and Outlet Outlets for 2-Prong PlugTo Attach the Legs to the Table Assembly InstructionsTo Mount The Router Table On a Workbench To Install The Miter GaugeTo Connect a Vacuum Hose To The Dust Port See Figure C Router Table Power Switch/Outlets AssemblySee Figure F and Assy. Diagram a To Install a Router BitTo Adjust The Depth Of The Cut Basic Operating Instructions Problem Possible Solution TroubleshootingPlease Read the Following Carefully INSPECTION, MAINTENANCE, and CleaningPart Description Qty Parts Lists & Assembly DiagramsParts List & Assembly Diagram a Router Parts List & Assembly Diagram B Router Table Limited 90 DAY Warranty
Top Page Image Contents