Craftsman 315.175 owner manual Depth of CUT Adjustments, See Figures 4, 5, Belowsubbase

Page 8

DEPTH OF CUT ADJUSTMENTS

See Figures 4, 5, and 6.

We recommend that cuts be made at a depth not exceeding 1/8 in. and that several passes be made to reach depths of cut greater than 1/8 in.

•Unplug your router.

_k WARNING: Failure to unplug your router could result in accidental starting causing

serious injury.

•Place your router on a flat surface, loosen locking knob, and turn depth adjusting ring until cutter is inside subbase. See Figure 4.

TO

 

 

TIGHTEN

 

 

LOCKING

CUTTERAT ZERO

 

DEPTHOF CUT

Fig. 5

 

TO

• Position your router so that the cutter can extend

 

 

below the subbase for desired depth setting.

 

See Figure 6.

DEPTH

ADJUSTING

RING

DEPTH

INDICATOR

RING

CUTTER

POINT

 

 

 

INSIDESUBBASE

SUBBASE

Fig. 4

•Turn depth adjusting ring until tip of cutter touches flat surface. Turn the depth indicator ring until the zero lines up with the indicator point on the base. Note: The depth indicator ring is also a zero reset indicator when setting cutter at zero depth of cut, then it becomes the depth adjusting ring.

See Figure 5.

CUTrER EXTENDED

 

BELOWSUBBASE

Fig. 6

•Tum the depth adjusting ring to obtain the desired depth of cut. The distance the cutter moves can be read on the depth adjusting ring. Each mark on the depth adjusting ring indicates 1/16 inch change in depth setting. Indicator point is located on the base.

•Tighten locking knob securely before operating router.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Router Full ONE Year Warranty on Craftsman Router ChargeRead ALL Instructions Symbol Meaning Safety AlertsymbolDouble Insulation Keep Hands Away from Routing Area Never USE in AN ExplosiveInspect Extension Cords Do not USE Tool Under Brownout orCollet Panel BIT STRAIGH1 Bits Cutter Bevel ChamferBIT Round Groove Chamfer Carbidetippedbits JSwitch Chip ShieldLOCK-ON Button Wrench Storage AreaINSTALLING/REMOVING Cutters See Figures 2Cuifer Wrench Collet NUT To Loosen Spindlelock To LockDepth of CUT Adjustments See Figures 4, 5,Tighten Locking Cutterat Zero Depthof CUT See FigureIndicatordepth Router TablesPractice Before Actual USE Helpful HintsForce Feeding Rate of FeedProper Feeding Width TOO Slow FeedingDepth of CUT Routing ThrustStarting and Ending a CUT Internal Routing Edging with Pilot BitsTOP Edge Shaping Edge RoungGeneral LubricationProper Care Ofcutters Proper Care OfcolletLead Power Handle Cordwork Ught Light Bulb ReplacementSee Figures 15 Nailor PIN REDCraftsman Router Model Number Parts List Parts Direct Standard Hardware Item MAY be Purchased Locally 175000

315.175 specifications

The Craftsman 315.175 is a versatile and robust power tool that has earned a solid reputation among DIY enthusiasts and professionals alike. Designed for various woodworking tasks, this model is particularly esteemed for its exceptional performance and user-friendly features.

One of the standout attributes of the Craftsman 315.175 is its powerful motor. Engineered to deliver substantial torque, the motor ensures maximum efficiency while tackling heavy-duty tasks. This power enables the tool to perform flawlessly across a range of applications, from home improvements to intricate craft projects.

The Craftsman 315.175 is equipped with an ergonomic design, which enhances user comfort during prolonged use. Its lightweight construction allows for easy maneuverability, reducing fatigue and improving overall control. The soft-grip handle provides additional comfort and grip, making it easier to handle the tool with precision.

This model features advanced technologies that set it apart from competitors. Notably, its quick-release blade change system allows users to swap out blades swiftly and effortlessly. This technology not only saves time but also enhances safety, as users can replace blades without the need for additional tools.

The Craftsman 315.175 also includes adjustable speed settings, providing users with the flexibility to adapt to various materials and tasks. Whether cutting through hardwood or softwood, users can select the optimal speed to achieve the desired results. This adaptability makes the tool suitable for a wide range of projects, from rough cuts to detailed finishing work.

Durability is another key characteristic of the Craftsman 315.175. Constructed with high-quality materials, this tool is designed to withstand the rigors of demanding use. The robust build ensures longevity, making it a reliable choice for both casual users and professional tradespeople.

Safety features are integral to the design of the Craftsman 315.175. With an integrated safety switch and blade guard, users can operate the tool with greater peace of mind. These features minimize the risk of accidents, allowing users to focus entirely on their projects.

In summary, the Craftsman 315.175 is a powerful, versatile, and user-friendly tool that caters to a broad spectrum of woodworking needs. Its robust motor, ergonomic design, quick-release blade change system, adjustable speed settings, and safety features collectively make it a top choice for anyone seeking efficiency without compromising on safety. Whether for professional use or DIY projects, the Craftsman 315.175 stands out as a dependable and effective tool.
Top Page Image Contents