Craftsman 315.175 INSTALLING/REMOVING Cutters, See Figures 2, Cuifer Wrench Collet NUT To Loosen

Page 7

WARNING:Yourroutershouldneverbe

n

connected to power supply when you are assembling parts, making adjustments, installing or removing cutters, cleaning, or when not in use. Disconnecting router will prevent accidental starting that could cause serious personal injury.

INSTALLING/REMOVING CUTTERS

See Figures 2 and 3.

•Unplug your router.

_h, WARNING: Failure to unplug your router could result in accidental starting causing serious

injury.

•A spindle lock is located on the front of the motor housing. To activate lock, push spindle lock in and slide into lock position. See Figure 2.

CU'I'FER

 

WRENCH

COLLET

NUT

 

TO LOOSEN

m

_, WARNING: To prevent damage to the spindle or spindle lock, always allow motor to come to a

complete stop before engaging spindle lock.

SPINDLELOCK

TO LOCK

SPINDLE

Fig. 2

•Place your router upside down on table, then turn collet nut with wrench until lock mechanism interlocks. See Figure 3.

Note: Spindle lock is spdng loaded end will snap into

position when lock mechanism interlocks.

Fig. 3

_k WARNING: If you are changing a cutter immediately after use, be careful not to touch the

cutter or collet with your hands or fingers. They will get burned because of the heat buildup from cutting. Always use the wrench provided.

•Remove cutters by turning collet nut counter- clockwise enough to allow cutter to slip easily from collet. See Figure 3. The collet is machined to precision tolerances to fit cutters with 1/4 in. diameter shanks.

•With your router still upside down on table, insert shank of cutter into collet. The shank of your cutter should be close to but not touching bottom of collet.

Tighten the collet nut securely by turning clockwise with the wrench provided. See Figure 3. Push spindle lock in and slide into unlock position. Otherwise, the interlocking mechanism of the spindle lock will not let you turn your router on.

,_ WARNING: Do not use cutters with undersized

shanks. Undersized shanks will not tighten properly and could be thrown from tool causing injury.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Router Charge Full ONE Year Warranty on Craftsman RouterDouble Insulation Symbol Meaning Safety AlertsymbolRead ALL Instructions Do not USE Tool Under Brownout or Keep Hands Away from Routing AreaNever USE in AN Explosive Inspect Extension CordsCarbidetippedbits J ColletPanel BIT STRAIGH1 Bits Cutter Bevel Chamfer BIT Round Groove ChamferWrench Storage Area SwitchChip Shield LOCK-ON ButtonSpindlelock To Lock INSTALLING/REMOVING CuttersSee Figures 2 Cuifer Wrench Collet NUT To LoosenSee Figure Depth of CUT AdjustmentsSee Figures 4, 5, Tighten Locking Cutterat Zero Depthof CUTHelpful Hints IndicatordepthRouter Tables Practice Before Actual USEProper Feeding Rate of FeedForce Feeding Depth of CUT TOO Slow FeedingWidth Thrust RoutingEdge Roung Starting and Ending a CUT Internal RoutingEdging with Pilot Bits TOP Edge ShapingProper Care Ofcollet GeneralLubrication Proper Care OfcuttersNailor PIN RED Lead Power Handle Cordwork UghtLight Bulb Replacement See Figures 15Craftsman Router Model Number Parts List Parts Direct Standard Hardware Item MAY be Purchased Locally 175000

315.175 specifications

The Craftsman 315.175 is a versatile and robust power tool that has earned a solid reputation among DIY enthusiasts and professionals alike. Designed for various woodworking tasks, this model is particularly esteemed for its exceptional performance and user-friendly features.

One of the standout attributes of the Craftsman 315.175 is its powerful motor. Engineered to deliver substantial torque, the motor ensures maximum efficiency while tackling heavy-duty tasks. This power enables the tool to perform flawlessly across a range of applications, from home improvements to intricate craft projects.

The Craftsman 315.175 is equipped with an ergonomic design, which enhances user comfort during prolonged use. Its lightweight construction allows for easy maneuverability, reducing fatigue and improving overall control. The soft-grip handle provides additional comfort and grip, making it easier to handle the tool with precision.

This model features advanced technologies that set it apart from competitors. Notably, its quick-release blade change system allows users to swap out blades swiftly and effortlessly. This technology not only saves time but also enhances safety, as users can replace blades without the need for additional tools.

The Craftsman 315.175 also includes adjustable speed settings, providing users with the flexibility to adapt to various materials and tasks. Whether cutting through hardwood or softwood, users can select the optimal speed to achieve the desired results. This adaptability makes the tool suitable for a wide range of projects, from rough cuts to detailed finishing work.

Durability is another key characteristic of the Craftsman 315.175. Constructed with high-quality materials, this tool is designed to withstand the rigors of demanding use. The robust build ensures longevity, making it a reliable choice for both casual users and professional tradespeople.

Safety features are integral to the design of the Craftsman 315.175. With an integrated safety switch and blade guard, users can operate the tool with greater peace of mind. These features minimize the risk of accidents, allowing users to focus entirely on their projects.

In summary, the Craftsman 315.175 is a powerful, versatile, and user-friendly tool that caters to a broad spectrum of woodworking needs. Its robust motor, ergonomic design, quick-release blade change system, adjustable speed settings, and safety features collectively make it a top choice for anyone seeking efficiency without compromising on safety. Whether for professional use or DIY projects, the Craftsman 315.175 stands out as a dependable and effective tool.
Top Page Image Contents