908935 -
1.Loosen the
2.Open the clamp (A) Fig. 4, and adjust the power unit so that the collet nut (B) engages the center hole in the
3.Tighten the
B |
D |
C |
A |
Fig. 5
OPERATION
Before attaching battery, Always make sure switch is in the “OFF” position.
INSTALLING OR REMOVING THE BATTERY PACK
TO REMOVE THE BATTERY PACK: Depress the battery release button (B) Fig. 6, and pull the battery pack from the tool.
TO INSTALL THE BATTERY PACK: Align the rails on the battery pack with the slots (A) Fig. 6 on the tool. Push the battery pack until it locks in place.
STARTING AND STOPPING THE MOTOR
Before starting the router, make sure that the bit is clear of the workpiece and foreign objects. Also keep a firm grip on the router to resist starting torque.
Start and stop the motor by moving the switch (A) Fig. 7 to “ON” or “OFF” position.
To avoid personal injury or damage to finished work, always allow the motor to come to a COMPLETE STOP before putting it down.
When
A
B
Fig. 6
A
Fig. 7
11