908935 -
|
|
|
| SAFETY SYMBOLS | |
SYMBOL |
| DEFINITION | |||
V | ........................ | volts | |||
A | ........................ | amperes | |||
Hz | ........................ | hertz | |||
W | ........................ | watts | |||
PSI | ........................ | pounds per square inch | |||
Min. | ........................ | minimum | |||
Max. | ........................ | maximum | |||
in. | ........................ | inch | |||
MM | ........................ | millimeters | |||
h | ........................ | hours | |||
min | ........................ | minutes | |||
s | ........................ | seconds | |||
|
|
|
| ......................... | alternating current |
|
|
|
| .......................... | direct current |
n0 | .......................... | no load | |||
|
|
|
| .......................... | alternating or direct current |
|
|
|
|
| Class II Construction |
|
|
|
| .......................... | |
|
|
|
|
| |
…/min | .......................... | revolutions or reciprocation per minute |
SAFETY INSTRUCTIONS FOR CHARGER AND
BATTERIES
SAFETY INSTRUCTIONS FOR CHARGER AND BATTERIES
1.SAVE THESE INSTRUCTIONS. This manual contains important safety and operating instructions for
2.Before using a battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery pack, and (3) product using battery.
3. To reduce risk of injury, a
4.Do not expose charger to rain, snow or frost.
5.Do not abuse cord. Never carry charger by cord or yank it to disconnect from receptacle. Pull by plug rather than cord when disconnecting charger. Have damaged or worn power cord and strain reliever replaced immediately. DO NOT ATTEMPT TO REPAIR POWER CORD.
6.Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
5