Installation Instructions

IMPORTANT!

Please Read Before Starting

This air conditioner meets strict safety and operating stan- dards. As the installer or service person, it is an important part of your job to install or service the system so it oper- ates safely and efficiently.

For safe installation and trouble-free operation, you must:

•Carefully read this OWNER’S MANUAL before installa- tion and service.

•Follow each installation or service step exactly as shown.

•Observe all local, state, and national electrical codes.

•Pay close attention to all warning and caution notices given in this manual.

		WARNING				This symbol refers to a hazard or
		WARNING				unsafe practice which can result
						unsafe practice which can result
						in severe personal injury or death.
						This symbol refers to a hazard or


		CAUTION
		CAUTION				unsafe practice which can result
						in personal injury or product or
						property damage.

If Necessary, Get Help

These instructions are all you need for most installation sites and maintenance conditions. If you require help for a special problem, contact our sales/service outlet or your certified dealer for additional instructions.

SPECIAL PRECAUTIONS

When Wiring

ELECTRICAL SHOCK CAN CAUSE SEVERE PERSON- AL INJURY OR DEATH. ONLY A QUALIFIED, EXPERI- ENCED ELECTRICIAN SHOULD ATTEMPT TO WIRE THIS SYSTEM.

•All wiring must conform to local electrical codes.

•Each unit must be properly grounded with a ground (or earth) wire or through the supply wiring.

•DO NOT, under any circumstances, cut or remove the third (ground) prong from the power cord plug.

•Never use an extension cord with this air conditioner.

•DO NOT use a damaged power cord, plug, or wall out- let. Replace them immediately.

•DO NOT change the internal wiring or any part of the system.

•DO NOT turn the air conditioner on and off by plugging and unplugging. Use the Operation switch (SELEC- TOR).

•Follow National Electrical Code (NEC) and local codes, ordinances and regulations. All wiring — including installation of receptacles, must be in accordance with these codes.

•The NEC requires permanent connection for installa- tions over 250 volts.

•Protective devices (fuses or circuit breakers) accept- able for this air conditioner are specified on the name- plate of each unit.

•Aluminum building wiring may pose special problems

—consult a qualified electrician.

When Transporting

Be careful when picking up and moving the air conditioner. Get a partner to help, and bend your knees when lifting to reduce strain on your back. Sharp edges or thin aluminum fins on the air conditioner can cut your fingers.

When Servicing

•Turn the power OFF at the main power box (mains) before opening the unit to check or repair electrical parts and wiring.

•Keep your fingers and clothing away from any moving parts.

•Clean up the site after you finish, remembering to check that no metal scraps or bits of wiring have been left inside the unit being serviced.

Tools Needed

Phillips screwdriver

Flat blade screwdriver

Others

CAUTION

•Before starting the installation, the power to the direct connect wiring should be set to OFF.

•Ventilate any enclosed areas when installing or testing the refrigeration system. Escaped refrigerant gas, on contact with fire or heat, can produce dangerously toxic gas.

•Confirm upon completing installation that no refrigerant gas is leaking. If escaped gas comes in contact with a stove, gas water heater, electric room heater or other heat source, it can produce dangerously toxic gas.

STW-2 Series specifications

The Sanyo STW-2 Series is a cutting-edge line of portable solar power systems designed to provide reliable energy solutions for various applications. Known for its versatility and efficiency, the STW-2 Series caters to consumers seeking sustainable energy sources for outdoor adventures, emergency backup, and even everyday use.

A standout feature of the STW-2 Series is its high-capacity lithium-ion battery, which ensures a reliable power supply wherever you go. With a variety of storage capacities, users can select models that best fit their energy needs, from lightweight options ideal for camping trips to more robust solutions for longer excursions.

One of the most notable technologies integrated into the STW-2 Series is its advanced solar charging system. Equipped with highly efficient monocrystalline solar panels, the STW-2 can harness sunlight effectively, converting it into usable electricity even in low-light conditions. This capability enables users to recharge their devices all day long, making it especially beneficial for outdoor activities that require prolonged power use.

Additionally, the Sanyo STW-2 Series features multiple output options, including USB ports, AC outlets, and DC carports, allowing users to charge various devices simultaneously. Whether it’s powering smartphones, laptops, cameras, or even small appliances, the STW-2 is engineered to cater to diverse energy demands without the hassle of carrying multiple chargers.

The design of the STW-2 Series also emphasizes portability and durability. Built with rugged materials, the units withstand harsh outdoor conditions, making them ideal for camping, hiking, or tailgating. Lightweight and compact, they can easily fit into backpacks, ensuring that users have a convenient power source at their fingertips.

Another characteristic that sets the Sanyo STW-2 Series apart is its user-friendly interface. With an LCD display, users can easily monitor battery status, charging progress, and output levels. This accessibility ensures that individuals can manage their energy consumption efficiently.

In conclusion, the Sanyo STW-2 Series offers a powerful, sustainable energy solution tailored to meet the needs of modern users. With its combination of high-capacity storage, advanced solar technology, multiple output options, rugged design, and user-friendly features, the STW-2 Series stands as a reliable option for anyone seeking portable solar power. Whether for recreational use or emergency preparedness, the Sanyo STW-2 Series is an innovative choice in the realm of renewable energy.