Installing the PFC3B
Figure 2 Removing the PFC3A
105736
Step 3 Place the PFC3A on an antistatic mat or antistatic foam pad.
Installing the PFC3B
Note In this section, the term "PFC3B" refers to the PFC3B and PFC3BXL unless otherwise noted.
To install the PFC3B on the Supervisor Engine 720, follow these steps:
Step 1 Remove the PFC3B from its antistatic bag.
Step 2 Insert the front edge of the PFC3B under the EMI gasket on the Supervisor Engine 720. (See Figure 3.)
Catalyst 6500 Series PFC3B and PFC3BXL Installation Note
| 7 |
| |
|
|
