Warranty & Service

This manual has been prepared for the owner and operators of a JOVS-10 Sander. Its purpose, aside from machine operation, is to promote safety through the use of accepted correct operating and maintenance procedures. Completely read the safety and maintenance instructions before operating or servicing the machine. To obtain maximum life and efficiency from your JET Sander, and to aid in using the machine safely, read this manual thoroughly and follow instructions carefully.

The WMH Tool Group warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Repair Stations located throughout the United States can give you quick service.

In most cases, any one of these WMH Tool Group Repair Stations can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET, Performax, Wilton, or Powermatic tools.

For the name of an Authorized Repair Station in your area, please call 1-800-274-6848, or visit www.wmhtoolgroup.com

More Information

Remember, the WMH Tool Group is consistently adding new products to the line. For complete, up-to- date product information, check with your local WMH Tool Group distributor, or visit www.wmhtoolgroup.com

WMH Tool Group Warranty

The WMH Tool Group (including Performax, Wilton and Powermatic brands) makes every effort to assure that its products meet high quality and durability standards and warrants to the original retail consumer/purchaser of our products that each product be free from defects in materials and workmanship as follow: 1 YEAR LIMITED WARRANTY ON ALL PRODUCTS UNLESS SPECIFIED OTHERWISE. This Warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, repair or alterations outside our facilities, or to a lack of maintenance.

THE WMH TOOL GROUP LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD SPECIFIED ABOVE, FROM THE DATE THE PRODUCT WAS PURCHASED AT RETAIL. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTIBILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THE WMH TOOL GROUP SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

To take advantage of this warranty, the product or part must be returned for examination, postage prepaid, to an Authorized Repair Station designated by our office. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection discloses a defect, we will either repair or replace the product, or refund the purchase price if we cannot readily and quickly provide a repair or replacement, if you are willing to accept a refund. We will return repaired product or replacement at JET’S expense, but if it is determined there is no defect, or that the defect resulted from causes not within the scope of JET’S warranty, then the user must bear the cost of storing and returning the product. This warranty gives you specific legal rights; you may also have other rights which vary from state to state.

The WMH Tool Group sells through distributors only. Members of the WMH Tool Group reserve the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason whatsoever.

JOVS-10 specifications

The Jet Tools JOVS-10 is a sophisticated and versatile tool that appeals to woodworking enthusiasts and professionals alike. Known for its durability and precision, the JOVS-10 stands out due to its robust build quality and impressive performance features. With a strong emphasis on user-friendliness, this tool is designed to meet the rigorous demands of woodworking tasks, ensuring that both beginners and experienced craftsmen can utilize it effectively.

One of the main features of the JOVS-10 is its powerful motor, which delivers exceptional cutting strength while maintaining a quiet operation. This motor is specifically engineered to provide a smooth and consistent power feed, allowing users to achieve clean and accurate cuts every time. With its variable speed control, users can adjust the cutting speed according to their specific project needs, making it highly adaptable for a variety of materials.

The JOVS-10 is equipped with advanced blade technology, which includes a high-tension system designed to keep the blade in optimal condition. This feature not only extends the life of the blade but also enhances the overall cutting performance. Additionally, the tool incorporates a precision-engineered fence system that provides stability and accuracy during operation. This is particularly beneficial for making precise bevel cuts and intricate designs.

Another notable characteristic of the JOVS-10 is its portability. The tool features a compact design that allows easy transportation and storage, making it an ideal choice for those who work in different locations or have limited workspace. Although compact, it does not compromise on stability or performance, and the base is engineered to minimize vibrations during operation.

Safety is a paramount concern with the JOVS-10. It comes with several safety features, including a blade guard and automatic shut-off systems, which help prevent accidents and ensure safe usage. The ergonomic design of the tool also allows for comfortable handling, reducing strain during prolonged use.

In terms of technologies, Jet Tools has integrated innovative solutions to enhance the functionality of the JOVS-10. The use of high-quality materials ensures durability, while the precision manufacturing processes guarantee that each tool meets strict quality standards. Overall, the Jet Tools JOVS-10 is a formidable addition to any workshop, combining high performance with user-centric designs that cater to the needs of both amateurs and seasoned professionals in woodworking.