Jet Tools JOVS-10 owner manual Awg

Page 3

WARNING

Wear￿eye protection.

Always keep guards in place and in proper operating condition. Do not operate the machine without the guards for any reason.

This sander is intended to be used with wood and wood products only. Use of this sander and a dust collector with metal products is a potential fire hazard.

Support the workpiece adequately at all times during operation; maintain control of the work at all times.

This sander is designed and intended for use by properly trained and experienced personnel only.

If you are not familiar with the proper and safe operation of a sander, do not use until proper

training and knowledge has been obtained.

• REMOVE ADJUSTING KEYS AND WRENCHES. Form a habit of checking to see that keys and adjusting wrenches are removed from the machine before turning it on.

• KEEP THE WORK AREA CLEAN. Cluttered areas and benches invite accidents.

• DON’T USE IN A DANGEROUS ENVIRONMENT. Don’t use power tools in damp or wet locations, or expose them to rain. Keep work area well lighted.

• KEEP CHILDREN AWAY. All visitors should be kept a safe distance from the work area.

• MAKE THE WORKSHOP KIDPROOF with padlocks, master swatches, or by removing starter keys.

• DON’T FORCE THE MACHINE. It will do the job better and safer at the rate for which it was designed.

• USE THE RIGHT TOOL. Don’t force a machine or attachment to do a job for which it was not designed.

• USE THE PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your machine will draw. An undersized cord will cause a drop in the line voltage resulting in power loss and overheating. The table following shows the correct size to use depending on the cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. Remember, the smaller the gauge number, the heavier the cord.

Volts

120V

Total Length of Cord in Feet

25

 

50

 

AWG

16

 

14

•WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry which may get caught in moving parts. Nonslip footwear is recommended. Wear protective hair covering to contain long hair.

•ALWAYS USE SAFETY GLASSES. Also use face or dust masks if the cutting operation is dusty. Everyday eyeglasses only have impact resistant lenses; they are not safety glasses.

•DON’T OVERREACH. Keep proper footing and balance at all times.

•MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents JOVS-10 Oscillating Spindle Sander Warranty & Service AWG Page Volt Operation Grounding InstructionsTable of Contents SpecificationsContents of the Shipping Container Tools Required for Assembly AdjustmentsUnpacking Installing Sanding Assemblies Mounting Sanding SleevesRemoving Sanding Assemblies Table Insert Sanding Assembly 90 to TableMaintenance Replacing Sanding SleevesDust Collection Sander will not start Troubleshooting Possible Cause SolutionBreakdown for the JET Oscillating Spindle Sander Parts List for the JET JOVS-10 Oscillating Spindle Sander JOVS10-147RC Running Capacitor not shown Sanding Assemblies OVS10-093 OVS10-133A Wiring Diagram

JOVS-10 specifications

The Jet Tools JOVS-10 is a sophisticated and versatile tool that appeals to woodworking enthusiasts and professionals alike. Known for its durability and precision, the JOVS-10 stands out due to its robust build quality and impressive performance features. With a strong emphasis on user-friendliness, this tool is designed to meet the rigorous demands of woodworking tasks, ensuring that both beginners and experienced craftsmen can utilize it effectively.

One of the main features of the JOVS-10 is its powerful motor, which delivers exceptional cutting strength while maintaining a quiet operation. This motor is specifically engineered to provide a smooth and consistent power feed, allowing users to achieve clean and accurate cuts every time. With its variable speed control, users can adjust the cutting speed according to their specific project needs, making it highly adaptable for a variety of materials.

The JOVS-10 is equipped with advanced blade technology, which includes a high-tension system designed to keep the blade in optimal condition. This feature not only extends the life of the blade but also enhances the overall cutting performance. Additionally, the tool incorporates a precision-engineered fence system that provides stability and accuracy during operation. This is particularly beneficial for making precise bevel cuts and intricate designs.

Another notable characteristic of the JOVS-10 is its portability. The tool features a compact design that allows easy transportation and storage, making it an ideal choice for those who work in different locations or have limited workspace. Although compact, it does not compromise on stability or performance, and the base is engineered to minimize vibrations during operation.

Safety is a paramount concern with the JOVS-10. It comes with several safety features, including a blade guard and automatic shut-off systems, which help prevent accidents and ensure safe usage. The ergonomic design of the tool also allows for comfortable handling, reducing strain during prolonged use.

In terms of technologies, Jet Tools has integrated innovative solutions to enhance the functionality of the JOVS-10. The use of high-quality materials ensures durability, while the precision manufacturing processes guarantee that each tool meets strict quality standards. Overall, the Jet Tools JOVS-10 is a formidable addition to any workshop, combining high performance with user-centric designs that cater to the needs of both amateurs and seasoned professionals in woodworking.
Top Page Image Contents