Jet Tools JOVS-10 guide

•ALWAYS DISCONNECT THE MACHINE FROM THE POWER SOURCE BEFORE SERVICING.

•REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure the switch is in the off position before plugging in.

•USE RECOMMENDED ACCESSORIES. The use of accessories and attachments not recommended by JET may cause hazards or risk of injury to persons.

•NEVER STAND ON A MACHINE. Serious injury could occur if the machine is tipped.

•CHECK DAMAGED PARTS. Before further use of the machine, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function - check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced.

•NEVER LEAVE THE MACHINE RUNNING UNATTENDED. TURN POWER OFF. Don’t leave the machine until it comes to a complete stop.

•SOME DUST CREATED by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•Lead from lead based paint

•crystalline silica from bricks and cement and other masonry products, and

•arsenic and chromium from chemically-treated lumber.

•Your risk from those exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specifically designed to filter out microscopic particles

•DO NOT operate tool while under the influence of drugs, alcohol or any medication.

•AVOID kickback by sanding in accordance with directional arrows.

•DO NOT sand pieces of material that are too small to be safely supported.

•WHEN sanding a large workpiece, provide additional support at table height.

•ADDITIONAL INFORMATION regarding the safe and proper operation of this product is available from the National Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-3201, in the Accident Prevention Manual for Industrial Operations and also in the safety Data Sheets provided by the NSC. Please also refer to the American National Standards Institute ANSI 01.1 Safety Requirements for Woodworking Machinery and the U.S. Department of Labor OSHA 1910.213 Regulations.

•SAVE THESE INSTRUCTIONS refer to them often and use them to instruct others.

JOVS-10 specifications

The Jet Tools JOVS-10 is a sophisticated and versatile tool that appeals to woodworking enthusiasts and professionals alike. Known for its durability and precision, the JOVS-10 stands out due to its robust build quality and impressive performance features. With a strong emphasis on user-friendliness, this tool is designed to meet the rigorous demands of woodworking tasks, ensuring that both beginners and experienced craftsmen can utilize it effectively.

One of the main features of the JOVS-10 is its powerful motor, which delivers exceptional cutting strength while maintaining a quiet operation. This motor is specifically engineered to provide a smooth and consistent power feed, allowing users to achieve clean and accurate cuts every time. With its variable speed control, users can adjust the cutting speed according to their specific project needs, making it highly adaptable for a variety of materials.

The JOVS-10 is equipped with advanced blade technology, which includes a high-tension system designed to keep the blade in optimal condition. This feature not only extends the life of the blade but also enhances the overall cutting performance. Additionally, the tool incorporates a precision-engineered fence system that provides stability and accuracy during operation. This is particularly beneficial for making precise bevel cuts and intricate designs.

Another notable characteristic of the JOVS-10 is its portability. The tool features a compact design that allows easy transportation and storage, making it an ideal choice for those who work in different locations or have limited workspace. Although compact, it does not compromise on stability or performance, and the base is engineered to minimize vibrations during operation.

Safety is a paramount concern with the JOVS-10. It comes with several safety features, including a blade guard and automatic shut-off systems, which help prevent accidents and ensure safe usage. The ergonomic design of the tool also allows for comfortable handling, reducing strain during prolonged use.

In terms of technologies, Jet Tools has integrated innovative solutions to enhance the functionality of the JOVS-10. The use of high-quality materials ensures durability, while the precision manufacturing processes guarantee that each tool meets strict quality standards. Overall, the Jet Tools JOVS-10 is a formidable addition to any workshop, combining high performance with user-centric designs that cater to the needs of both amateurs and seasoned professionals in woodworking.