Sun Microsystems X4150 manual TABLE A-2 General Commands, TABLE A-3 User Commands

TABLE A-2General Commands

Description	Command
Log out of the CLI.	exit
Display the version of the ELOM firmware	version
running on the SP.
Display information about commands and targets. help
Display information about a specific command.	help show

TABLE A-3User Commands

Description	Command
Add a local user.	create /SP/users/user1
Set or change password.	set /SP/users/username Password=password
Set or change permission.	set /SP/users/username Permission=
	[operatoradministratorusercallback]
Delete a local user named user1.	delete /SP/users/user1
Change the permission level of a	set /SP/users/user1 Permission=operator
local user named user1.

TABLE A-4Network and Serial Port Setting Commands

Description Command

Display network configuration information.

Change network properties for the ELOM. Changing certain network properties, like the IP address, will disconnect your active session.

Set DHCP or change to static settings.

show /SP/network

set /SP/network IPAddress=xxx.xxx.xxx.xxx

NetMask=xxx.xxx.xxx.xxx

Gateway=xxx.xxx.xxx.xxx

set /SP/network IPSource= [dhcpstatic]

96 Sun Fire X4150 Server Embedded Lights Out Manager Administration Guide • September 2007