Sun Microsystems X4150 manual To Add a User, Click any button labeled Add User

The permissions that a user can be assigned include:

■Administrator – Enables read and write access to all ELOM software features, functions, and commands.

■Operator – Enables limited access to SP software features, functions, and commands. Operators cannot change their assigned roles.

■User – Enables a user to access the system without being able to add, modify, or delete accounts.

■Callback – Enables access to commands that set up the callback feature.

Note – If the SP password has been changed and then lost, a BIOS option exists to reset the password back to the default changeme. See “Resetting the Service Processor” on page 44. This method is not supported if you use a virtual CD-ROM.

▼To Add a User

1.From the User Management submenu, click the User Account tab. The User List screen appears.

2.Click any button labeled Add User.

The Manage User Account screen appears (see FIGURE 4-3).

If all 10 user account slots are configured, you must delete an existing user account before you can add a new user account. See “To Delete a User Account” on page 41.

Chapter 4 Configuring, Managing and Maintaining the Server Using the Web-Based Interface 39