Sun Microsystems X4150 manual show, set /SP/users/susan permission=administrator, Examples, Syntax

TABLE A-10set Command Targets, Properties, and Values (Continued)

Valid Targets	Properties	Values	Default
/SP/AgentInfo/SNMP	Permission	rorw	ro
community/communityname
/SP/AgentInfo/SNMP/user	AuthProtocol	MD5SHA	MD5
/username	AuthPassword	string	(Null string)
	Permission	rorw	ro
	PrivacyProtocol	noneDES	DES
	PrivacyPassword	string	(null string)
/SP/network	IIPaddress	IP addressnone	(None)
	DNS	IP addressnone	(None)
	IPSource	dhcpstatic	dhcp
	Gateway	IP addressnone	(None)
	Netmask	IP dotted decimal	xxx.xxx.xxx.xxx

Examples

->set /SP/users/susan permission=administrator

show

Use the show command to display information about targets and properties.

The show command is used to display information about managed elements. It can be used to view information about single managed elements, a tree of managed elements, or managed elements matching a property value filter.

The -leveloption controls the depth of the show command, and it applies to all modes of the -displayoption. Specifying -level 1 displays the level of the namespace where the object exists. Values greater than 1 return information for the target's current level in the namespace and the specified value levels below. If the argument is -level all, it applies to the current level in the namespace and everything below.

Syntax

show [options] target[propertyname]

104 Sun Fire X4150 Server Embedded Lights Out Manager Administration Guide • September 2007