Sun Microsystems X4150 manual Command Verbs, Options, 1 describes the CLI command verbs

Command Verbs

TABLE 7-1describes the CLI command verbs.

TABLE 7-1CLI Command Verbs

Command	Description
cd	Navigates the object namespace.
create	Sets up an object in the namespace.
delete	Removes an object from the namespace.
exit	Terminates a session to the CLI.
help	Displays Help information about commands and targets.
losd
reset	Resets the target’s state.
set	Sets target properties to the specified value.
show	Displays information about targets and properties.
start	Starts the target.
stop	Stops the target.
version	Displays the version of ELOM firmware that is running.

Options

The CLI supports the following options. Not all options are supported for all commands. See a specific command section for the options that are valid with that command. The -helpand -examineoptions can be used with any command.

TABLE 7-2CLI Options

Option Long Form	Short Form	Description
-default		Causes the verb to perform only its default functions.
-destination		Specifies the destination for data.
-display	-d	Shows the data you want to display.
-examine	-x	Examines the command but does not execute it.
-force	-f	Causes an immediate action instead of an orderly
		shutdown.
-help	-h	Displays Help information.

Chapter 7 Using the Command-Line Interface 71