Sun Microsystems X4150 manual Managing the Host State

TABLE 7-2CLI Options (Continued)

Option Long Form	Short Form	Description
-keep	-k	Establishes a holding time for command job ID and
		status.
-level	-l	Executes the command for the current target and all
		targets contained through the level specified.
-output	-o	Specifies the content and form of command output.
-resetstate		Indicates to what target-specific state to reset the
		target.
-script		Skips warnings or prompts normally associated with
		the command.
-source		Indicates the location of a source image.

Targets

Every object in your namespace is a target. Not all targets are supported for all commands. Each command section lists the valid targets for that command.

Properties

Properties are the configurable attributes specific to each object. An object can have one or more properties. Each command section lists the valid properties for each target.

Managing the Host

You can use the ELOM to change the host’s state and to access the host console.

Managing the Host State

■To power on the host, enter one of the following commands: set /SYS/CtrlInfo PowerCtrl=on

-or-

start SYS

72 Sun Fire X4150 Server Embedded Lights Out Manager Administration Guide • September 2007