Viewing the System From the Web Browser | Sun Microsystems X4150

3.Click Log In.

The web-based interface appears.

To log out of the web-based interface:

●Click the Logout button in the upper right corner of the screen.

Viewing the System From the Web Browser

The system is equipped with a number of sensors that measure voltages, temperatures, fan speed, and so on. The System Information tab shows the current system status and provides access to the Version, Session Time-Out, and the Components submenu tabs (see FIGURE 3-1).

FIGURE 3-1ELOM System Information Screen

TABLE 3-1lists the ELOM main menu and submenu tabs and points to relevant sections in this manual.

TABLE 3-1ELOM Tab Detail Choices

Main Tab	Submenu Tab	Where to Find Details

System		“Viewing System and Component Information”
Information		on page 16.
	Server Board Information	“Viewing Version Information” on page 16.
	SP Version	“Viewing Version Information” on page 16.

14 Sun Fire X4150 Server Embedded Lights Out Manager Administration Guide • September 2007

Image 30

Sun Microsystems X4150 manual Viewing the System From the Web Browser, 1ELOM Tab Detail Choices

Contents

Sun Microsystems, Inc Page Contents To Access the Elom Using a Web Browser To Clear the Event Log Using the Remote Console Application Using Ipmi Using the Command-Line Interface Using Simple Network Management Protocol Command-LineInterface Reference Glossary IndexPage Figures Page Preface How This Document Is Organized Using Unix Commands Typographic Conventions Related Documentation Sun Documentation, Support, and Training Third-Party Web SitesSun Welcomes Your Comments Sun Fire X4150 server Elom Overview Sun Fire X4150 server Elom Features Embedded Lights Out Manager Common Tasks1ELOM Common Tasks Sun Fire X4150 server Default Settings 2SP Controller and Firmware Default Settings About the Preconfigured Administrator Account About the Indicator and Fault LEDs Connecting to the Elom 1Methods of Connecting to the Elom Connecting Using a Serial ConnectionTo Connect Using a Serial Connection About Connection Tasks Connecting Using Ethernet Enter the following commandLog in to the CLI Connecting to the CLI Enter the following command -exit Click Log Click the Log Out buttonPage Monitoring the Server System Using the Web-Based Interface Using the Web-Based Interface Browser and Software Requirements Users and PrivilegesWeb-Based Interface Tasks Accessing the Elom Using a Web Browser To Access the Elom Using a Web Browser Viewing the System From the Web Browser 1ELOM Tab Detail Choices User Management Viewing Version Information To View SP Version Information Viewing System and Component InformationTo View System Information On the main menu, click the System Information tab Viewing Component Information To View CPU Information 3Sample Server Board Information 4Sample CPU Information 5Sample Memory Information Monitoring the System SensorsViewing Memory Information To View Memory Information 6Sample Memory for DIMMA0 To Monitor the System Sensors Reading Sensors To Read SensorsOn the main menu, click System Monitoring Viewing a Sensor Summary To View a Sensor Summary From the Sensor Reading tab, select the Summary tab CPU 0 Temp Too high Monitoring Fans To Monitor Fans Monitoring Temperatures To Monitor TemperaturesFrom the Sensor Reading tab, select the Temperature tab From the Sensor Reading tab, select the Fan tab From the Sensor Reading tab, click the Voltage tab Monitoring Voltages To Monitor VoltageViewing and Managing the Event Log 14Sample of the Voltage Monitor Screen To Save the Event Log To Display the Event LogTo View the Event Logs From the Event Logs tab, select View Event Logs To Clear the Event Log Chapter Configuring the System To Configure the System From the main menu, click the Configuration tab Configuring Platform Event Filters Configuring E-mail NotificationTo Configure E-mail Notification From the Configure submenu, click the Network tab To Configure a Platform Event Filter Options are Ffh All sensors Configuring System Management Access To access the System Management Access SubmenusClick Submit to create the filter Configuring Snmp Click Generate to create a new CSR1Example of Required SSL Information To Configure Snmp To Add an Snmp Community To Delete an Snmp Community To Modify an Snmp CommunityTo Add an Snmp User To Edit an Snmp User Configuring Active Directory ServiceTo Delete an Snmp User Click Submit to create the new user To Configure Active Directory Service Managing and Maintaining the SystemManaging Users and Accounts To Add a User Type a password in the Password field 3The User Management Screen To Change a User Password or Privilege To Disable or Enable a UserTo Delete a User Account Managing the System Locator Indicator LED To Control the State of the System Indicator LEDManaging the Front Panel and On-Board Fault LEDs To View the State of the Fault LEDs To Turn the Fault LEDs Off Resetting the Service Processor Setting Power ControlTo Set Power Control To Reset the Service Processor Updating the Firmware Using a Web Browser Click Reset SP buttonUpdating the Firmware To Update the Firmware Using a Web Browser Recovering from a Corrupt SPSelect the firmware file or Cpld file to update To Recover From a Corrupt SP To Disable the Session Timeout Managing Session TimeoutTo Set the Session Timeout Click the Submit button to set the session timeout Setting the Time To Set the Time From the Configuration submenu, click the Set Time tabPage Accessing the Remote Console Requirements 1Client Installation Requirements CD and Diskette Redirection Operational Model 2Remote Console Operation With DVD Drive and Diskette Drive To Start the Remote Console Application Click LoginStarting the Remote Console Application Click Launch Setting Parameters for the Remote Console From the Remote Control submenu, select Hotkey SetupTo Set Parameters for the Remote Console Redirecting Keyboard, Video, Mouse, or Storage Devices To Redirect Keyboard and Mouse Devices To Redirect Storage Devices Select a source device from the drop-down list Installing an Operating System on a Remote Server To Install an OS on a Remote Server Using a Virtual CD-ROMType the user name and password in the login screen Other Remote Options Page Using Ipmi About Ipmi IPMItool Sensors Supported Ipmi 2.0 Commands 1Supported Ipmi 2.0 Commands 2Supported Ipmi 2.0 Commands General Commands FRU Device Commands Serial/Modem Device Commands 2Supported Ipmi 2.0 Commands Page Using the Command-Line Interface Logging In to the CLI Command Syntax Syntax 1CLI Command Verbs 2CLI Options Managing the Host Managing the Host State Managing the Host Console Viewing Host Sensors Managing Elom Network Settings To Display Network SettingsTo Configure Network Settings Managing Local User Accounts With Targets, Properties, and Values Enter the following command delete /SP/users/username To Delete a User Account Using the CLITo Display User Accounts Using the CLI Enter the following command show /SP/users Configuring User Accounts Managing Alerts Displaying AlertsTo Display Alerts Output of the show command appears Configuring Alerts Configuring the PEF Global Controls To Configure the PEF Global Controls Configuring the Event Filter Tables To Configure the Event Filter Tables Result of executing the show command appears Displaying Version Information To Display the Current SP Version Information To Update the Firmware To update the firmware, enter one of the following commandsUpdating the Firmware Start the Tftp download Select Yes to continue, or No to exitPage About Snmp How Snmp Works Snmp MIB Files MIBs Integration Snmp Messages 1Sun Server MIB Tree Managing Snmp User Accounts Configuring Snmp on the ElomConfiguring Receipt of Snmp Traps Adding Your Server to Your Snmp Environment Deleting a User Account 1SNMP Targets, Properties, and Values Show CLI Command Quick Reference Table A-1Command Syntax and Usage Table A-2General Commands Table A-3User CommandsTable A-4Network and Serial Port Setting Commands Table A-5Alert Commands Table A-6SNMP CommandsTable A-7System Start, Stop, and Reset Commands Set /SYS/CtrlInfo PowerCtrl=reset CLI Command Reference Create Example Table A-9delete Command Targets DeleteExit Help Usage load -source URL target Table A-10set Command Targets, Properties, and Values Set Show SP/AgentInfo/SNMP/user Start Command Target Start Reset Table A-12stop Command TargetStop Version Page Advanced Configuration Power Interface Access control listAddress Resolution Glossary Advanced Technology Attachment Packet Advanced Programmable Interrupt ControllerAdvanced Technology Alert Standard Format Bios Basic Certificate Authority Coordinated Universal Command-line interfaceCommon Information Customer-replaceable Digital Signature Direct memory accessDomain name server Domain name service Distinguished Name Domain Name System Dual inline memory Dynamic Host Configuration ProtocolDynamic random access Electrically erasable programmable read- only memory Fibre Channel Arbitrated Loop Erasable programmable read-only memoryExternally initiated Field-replaceable unit Grand Unified File Transfer ProtocolFully qualified domain Graphical user interface Hypertext Transfer Hypertext Transfer Protocol SecureIn-band system Internet Protocol IP Intelligent Platform Management InterfaceInternet Control Message Protocol Interrupt request Keyboard Controller Java Web StartJumpStart Keyboard, video, mouse, storage Media access control Lightweight Directory Access ProtocolLightweight Directory Access Protocol Ldap Local area network Network Information Nonvolatile random access memoryNetwork file system Network interface card Peripheral Component Object identifierOut-of-band OOB Peripheral Interface Platform Event Filter Power-on self-testPreboot Execution Platform Event Trap Programmable read- only memory Remote procedure call Redundant array of independent disksRemote Management Control Protocol Serial Attached Scsi Secure Sockets LayerSensor data record Server Message Block Spanning Tree Protocol Simple Network Management ProtocolSmall Computer System Interface System event log Transmission Control Protocol/Internet Uninterruptible powerTransmission control Trivial File Transport User identification number UID User identificationUserID a unique string identifying a user to a system Voltage regulatorPage Index LED Index