Accessing the Elom Using a Web Browser | Sun Microsystems X4150

Monitoring and managing system status:

■Monitor the status of system fans, temperatures, and voltages remotely.

■Monitor BIOS power-on self-test (POST) progress log entries remotely.

■View, save, and clear system event logs.

■Examine component information, including CPUs, DIMMs, voltages, and fans.

■Power on, power off, power cycle, reset the system remotely, reboot and enter the system BIOS, reboot and enter diagnostics (Pc-Check), and send NMI.

Managing and modifying system variables:

■Manage user accounts locally and remotely.

■Configure settings.

■Update BIOS firmware.

Accessing the ELOM Using a Web Browser

The ELOM boots automatically when a Sun server is cabled appropriately and plugged in to an AC power supply. This usually occurs within one minute. However, if the management Ethernet is not connected, or if the ELOM's Dynamic Host Configuration Protocol (DHCP) process fails due to the absence of a DHCP server on the management network, the ELOM might take a few minutes longer to boot.

Note – Disabling the use of the browser proxy server (if one is used) for access to the management network might speed the browser response time.

▼To Access the ELOM Using a Web Browser

1.To log in to the web-based interface, type the IP address of the ELOM in your web browser.

The login screen appears.

2.In the login screen that appears, type the default user name and password. Username: root

Password: changeme

Chapter 3 Monitoring the Server System Using the Web-Based Interface 13

Image 29

Sun Microsystems X4150 manual Accessing the Elom Using a Web Browser, To Access the Elom Using a Web Browser

Contents

Sun Microsystems, Inc Page Contents To Access the Elom Using a Web Browser To Clear the Event Log Using the Remote Console Application Using the Command-Line Interface Using Ipmi Using Simple Network Management Protocol Glossary Index Command-LineInterface ReferencePage Figures Page How This Document Is Organized Preface Using Unix Commands Related Documentation Typographic Conventions Sun Welcomes Your Comments Sun Documentation, Support, and TrainingThird-Party Web Sites Sun Fire X4150 server Elom Overview 1ELOM Common Tasks Sun Fire X4150 server Elom FeaturesEmbedded Lights Out Manager Common Tasks 2SP Controller and Firmware Default Settings Sun Fire X4150 server Default Settings About the Indicator and Fault LEDs About the Preconfigured Administrator Account Connecting to the Elom To Connect Using a Serial Connection Connecting Using a Serial Connection1Methods of Connecting to the Elom About Connection Tasks Log in to the CLI Connecting Using EthernetEnter the following command Enter the following command -exit Connecting to the CLI Click the Log Out button Click LogPage Using the Web-Based Interface Monitoring the Server System Using the Web-Based Interface Web-Based Interface Tasks Browser and Software RequirementsUsers and Privileges To Access the Elom Using a Web Browser Accessing the Elom Using a Web Browser 1ELOM Tab Detail Choices Viewing the System From the Web Browser User Management To View System Information Viewing System and Component InformationViewing Version Information To View SP Version Information On the main menu, click the System Information tab 3Sample Server Board Information Viewing Component Information To View CPU Information 4Sample CPU Information Viewing Memory Information To View Memory Information Monitoring the System Sensors5Sample Memory Information 6Sample Memory for DIMMA0 On the main menu, click System Monitoring To Monitor the System SensorsReading Sensors To Read Sensors From the Sensor Reading tab, select the Summary tab Viewing a Sensor Summary To View a Sensor Summary CPU 0 Temp Too high From the Sensor Reading tab, select the Temperature tab Monitoring Temperatures To Monitor TemperaturesMonitoring Fans To Monitor Fans From the Sensor Reading tab, select the Fan tab Viewing and Managing the Event Log Monitoring Voltages To Monitor VoltageFrom the Sensor Reading tab, click the Voltage tab 14Sample of the Voltage Monitor Screen To View the Event Logs To Display the Event LogTo Save the Event Log From the Event Logs tab, select View Event Logs To Clear the Event Log Chapter Configuring the System From the main menu, click the Configuration tab To Configure the System To Configure E-mail Notification Configuring E-mail NotificationConfiguring Platform Event Filters From the Configure submenu, click the Network tab To Configure a Platform Event Filter Options are Ffh All sensors Click Submit to create the filter Configuring System Management AccessTo access the System Management Access Submenus 1Example of Required SSL Information Configuring SnmpClick Generate to create a new CSR To Add an Snmp Community To Configure Snmp To Add an Snmp User To Delete an Snmp CommunityTo Modify an Snmp Community To Delete an Snmp User Configuring Active Directory ServiceTo Edit an Snmp User Click Submit to create the new user Managing Users and Accounts To Configure Active Directory ServiceManaging and Maintaining the System To Add a User 3The User Management Screen Type a password in the Password field To Delete a User Account To Change a User Password or PrivilegeTo Disable or Enable a User Managing the Front Panel and On-Board Fault LEDs Managing the System Locator Indicator LEDTo Control the State of the System Indicator LED To Turn the Fault LEDs Off To View the State of the Fault LEDs To Set Power Control Setting Power ControlResetting the Service Processor To Reset the Service Processor Updating the Firmware Updating the Firmware Using a Web BrowserClick Reset SP button Select the firmware file or Cpld file to update To Update the Firmware Using a Web BrowserRecovering from a Corrupt SP To Recover From a Corrupt SP To Set the Session Timeout Managing Session TimeoutTo Disable the Session Timeout Click the Submit button to set the session timeout From the Configuration submenu, click the Set Time tab Setting the Time To Set the TimePage Requirements Accessing the Remote Console CD and Diskette Redirection Operational Model 1Client Installation Requirements 2Remote Console Operation With DVD Drive and Diskette Drive Starting the Remote Console Application Click LoginTo Start the Remote Console Application Click Launch To Set Parameters for the Remote Console Setting Parameters for the Remote ConsoleFrom the Remote Control submenu, select Hotkey Setup To Redirect Keyboard and Mouse Devices Redirecting Keyboard, Video, Mouse, or Storage Devices Select a source device from the drop-down list To Redirect Storage Devices Type the user name and password in the login screen Installing an Operating System on a Remote ServerTo Install an OS on a Remote Server Using a Virtual CD-ROM Other Remote Options Page About Ipmi Using Ipmi Sensors IPMItool 1Supported Ipmi 2.0 Commands Supported Ipmi 2.0 Commands General Commands 2Supported Ipmi 2.0 Commands FRU Device Commands Serial/Modem Device Commands 2Supported Ipmi 2.0 Commands Page Logging In to the CLI Using the Command-Line Interface Syntax Command Syntax 2CLI Options 1CLI Command Verbs Managing the Host State Managing the Host Viewing Host Sensors Managing the Host Console To Configure Network Settings Managing Elom Network SettingsTo Display Network Settings Targets, Properties, and Values Managing Local User Accounts With To Display User Accounts Using the CLI To Delete a User Account Using the CLIEnter the following command delete /SP/users/username Enter the following command show /SP/users Configuring User Accounts To Display Alerts Managing AlertsDisplaying Alerts Output of the show command appears Configuring Alerts Configuring the PEF Global Controls Configuring the Event Filter Tables To Configure the PEF Global Controls To Configure the Event Filter Tables Result of executing the show command appears To Display the Current SP Version Information Displaying Version Information Updating the Firmware To Update the FirmwareTo update the firmware, enter one of the following commands Select Yes to continue, or No to exit Start the Tftp downloadPage How Snmp Works About Snmp MIBs Integration Snmp MIB Files 1Sun Server MIB Tree Snmp Messages Configuring Receipt of Snmp Traps Configuring Snmp on the ElomManaging Snmp User Accounts Adding Your Server to Your Snmp Environment 1SNMP Targets, Properties, and Values Deleting a User Account Show Table A-1Command Syntax and Usage CLI Command Quick Reference Table A-4Network and Serial Port Setting Commands Table A-2General CommandsTable A-3User Commands Table A-7System Start, Stop, and Reset Commands Table A-5Alert CommandsTable A-6SNMP Commands Set /SYS/CtrlInfo PowerCtrl=reset CLI Command Reference Example Create Exit Table A-9delete Command TargetsDelete Usage load -source URL target Help Set Table A-10set Command Targets, Properties, and Values SP/AgentInfo/SNMP/user Show Start Start Command Target Stop ResetTable A-12stop Command Target Version Page Address Resolution Access control listAdvanced Configuration Power Interface Glossary Advanced Technology Advanced Programmable Interrupt ControllerAdvanced Technology Attachment Packet Alert Standard Format Certificate Authority Bios Basic Common Information Command-line interfaceCoordinated Universal Customer-replaceable Domain name server Domain name service Direct memory accessDigital Signature Distinguished Name Dynamic random access Dynamic Host Configuration ProtocolDomain Name System Dual inline memory Electrically erasable programmable read- only memory Externally initiated Erasable programmable read-only memoryFibre Channel Arbitrated Loop Field-replaceable unit Fully qualified domain File Transfer ProtocolGrand Unified Graphical user interface In-band system Hypertext TransferHypertext Transfer Protocol Secure Internet Control Message Protocol Intelligent Platform Management InterfaceInternet Protocol IP Interrupt request JumpStart Java Web StartKeyboard Controller Keyboard, video, mouse, storage Lightweight Directory Access Protocol Ldap Lightweight Directory Access ProtocolMedia access control Local area network Network file system Nonvolatile random access memoryNetwork Information Network interface card Out-of-band OOB Object identifierPeripheral Component Peripheral Interface Preboot Execution Power-on self-testPlatform Event Filter Platform Event Trap Programmable read- only memory Remote Management Control Protocol Remote procedure callRedundant array of independent disks Sensor data record Secure Sockets LayerSerial Attached Scsi Server Message Block Small Computer System Interface Simple Network Management ProtocolSpanning Tree Protocol System event log Transmission control Uninterruptible powerTransmission Control Protocol/Internet Trivial File Transport UserID a unique string identifying a user to a system User identificationUser identification number UID Voltage regulatorPage Index LED Index