Sun Microsystems manual Sun Fire X4150 server Default Settings

TABLE 1-1ELOM Common Tasks (Continued)

		Web-
		Based
Task	IPMI	Interface	CLI	SNMP
Interrogate system components for their IDs and serial	Yes	-	Yes	Yes
numbers.
Redirect the system serial console to a remote client.	Yes	-	Yes	-
Monitor system status (health check) remotely.	Yes	Yes	Yes	Yes
Interrogate system network interface cards remotely for	Yes	Yes	Yes	-
MAC addresses.
Manage user accounts remotely.	Yes	Yes	Yes	-
Manage system power status remotely (power on,	Yes	Yes	Yes	-
power off, power reset).
Monitor and manage environmental settings for key	Yes	Yes	Yes	Monitor
system components (CPUs, motherboards, fans).				only

Sun Fire X4150 server Default Settings

Sun has configured the SP controller and SP firmware on your server to use the most common default settings. It is unlikely that you will need to change any of these defaults.

TABLE 1-2SP Controller and Firmware Default Settings

System Component	Default Status	Action Required
Service processor card	Preinstalled	None
Service processor firmware	Preinstalled	None
IPMI interface	Enabled	None
Web-based interface	Enabled	None
Command-line interface (CLI)	Enabled	None
SNMP interface	Enabled	None

Chapter 1 Sun Fire X4150 server ELOM Overview 3