Sun Microsystems X4150 manual Configuring the SSL Certificate To Configure the SSL Certificate

Configuring the SSL Certificate

▼To Configure the SSL Certificate

1.From the System Management Access submenu, click the SSL Certificate tab. The SSL Certificate screen appears.

2.Select either Certificate or CSR from the drop-down list.

3.Fill in the required fields in the SSL Configuration section.

4.Click Generate to create the certificate.

5.Click Upload to bring the certificate into view.

Note – If no certificate has yet been assigned, follow the directions below to generate a new CSR.

6.Follow the onscreen directions, and fill in the fields using the example as a guide.

The example in TABLE 4-1represents the kind of information required.

TABLE 4-1Example of Required SSL Information

Common Name (CN):	localhost.localdomain
Organization Unit (OU):	Your Name
Organization (O):	Your Company Name
Country Code (C):	U.S.A. (drop-down list of countries)
Locality (L):	Your Location
State (S):	Your State
E-mail Address (E):	youradmin@localhost.localdomain

7. Click Generate to create a new CSR.

Configuring SNMP

A series of screens allow you to set port, requests, and SNMP permission parameters for the system you are logged in to.

34 Sun Fire X4150 Server Embedded Lights Out Manager Administration Guide • September 2007