INTRODUCTION
ForewordSpecifications
The specifications, details, and photographs in this manual represent the Model H8219 as supplied when the manual was prepared. However, owing to Grizzly’s policy of continuous improvement, changes may be made at any time with no obligation on the part of Grizzly.
If you have any comments regarding this manual, please write to us at the following address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA
Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570)
Fax: (800)
Web Site: http://www.grizzly.com
No Load Speed | 8,000 RPM |
Air Consumption | 6 CFM |
Air Inlet | 1⁄4" |
Required PSI | 90 PSI |
Specifications
H8219 Inventory
A.Air Orbital Sander
B.1/4" NPT Male Quick Connect Fitting
C.Tool Oil Bottle
A
C
B
Figure 1. Model H8219 Inventory.
Model H8219 Air Orbital Sander |