Inventory
The Model G0565 Sponge Sander comes almost entirely assembled. The remaining parts can be found in a bag inside the cabinet. After removing the parts from the bag, you should have the fol- lowing items:
Hardware Bag | 1 |
— Hex Nut | 4 |
— Flat Washer 3⁄8" | 4 |
— Lock Washer 3⁄8" | 4 |
— Rubber Feet | 4 |
— Open End Wrench 1" | 1 |
— Arbor Wrench 11⁄2" | 1 |
Figure 3. Parts inventory.
In the event that any nonproprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them, or for the sake of expedi- ency, replacements can be obtained at your local hardware store.
Site Considerations
Floor Load
The Model G0565 weighs 167 lbs. and has a base footprint of 221⁄2" W x 19" D. Most commer- cial floors are suitable for your machine. Some residential floors may require additional reinforce- ment to support both the machine and operator.
Working Clearances
Consider existing and anticipated needs, size of material to be processed through each machine, and space for auxiliary stands, work tables or other machinery when establishing a location for your sponge sander. See Figure 4 for the mini- mum working clearances of the Model G0565.
���
���
Figure 4. Working clearances.
Unsupervised children and visitors inside your shop could cause serious per- sonal injury to themselves. Lock all entrances to the shop when you are away and DO NOT allow unsupervised children or visitors in your shop at any time!
G0565 Adjustable Sponge Sander |