6.Attach to the manifold one of the remaining ball valves and 3⁄8" hose nipple, the red hose, pressure gauge, and the pipe as shown in Figure 5.
Air Pressure Gauge
8.Connect the water separator assembly to the air supply Manifold as shown in Figure 7.
9.Now connect the gauge and water separator assembly to the top of the tank as shown in Figure 7.
Air Supply
Manifold
Pipe
Manifold
Water
Separator
Assy.
Tank
Ball Valve
Nipple
Figure 5. Gauge/air supply control installation.
7.Install the remaining ball valve to the water separator with two 3⁄8" nipples, and the 3⁄8" female nipple as shown in Figure 6.
Ball Valve Nipple
Nipple