Grizzly G0724 owner manual Accessories

Page 21

SECTION 5: ACCESSORIES

Some aftermarket accessories can be installed on this machine that could cause it to function improperly, increasing the risk of serious personal injury. To minimize this risk, only install accessories recommended for this machine by Grizzly.

NOTICE

Refer to the newest copy of the Grizzly Catalog for other accessories available for this machine.

12" PSA Sandpaper Discs

 

MODEL

GRIT

G1220

60

G4255

80

G1221

100

G4256

120

G1222

150

G4257

180

G4258

220

Figure 18. Sandpaper discs.

Model G0724 (Mfg. Since 09/11)

PRO-STICK®Abrasive Surface Cleaners Extend the life of your sanding discs and sleeves! Choose the Pro-Stick®with a handle for greater control or without a handle for more usable area.

MODEL

SIZE

G1511

112" X 112" X 812"

G1512

2" X 2" X 12"

G2519

112" X 112" X 9" with Handle

G2520

2" X 2" X 11" with Handle

 

 

 

 

Figure 19. PRO-STICK®abrasive cleaners.

Duct Adapters

These direct-sized dust collection adapters allow slip on connection to Shop-vac®and Sears® port openings. Also handy for the model G0724 disc sander dust port connection.

MODEL

SIZE

G3119

212" x 3"

G3119

212" x 4"

G2551

G3119

Figure 20. Sized dust collection adapters. -19-

Image 21
Contents Model G0724 Disc Sander Page Table of Contents Introduction Manual Accuracy Contact InfoMachine Description G0724 controls and components IdentificationMachine Data Sheet Safety Instructions for Machinery SafetyPage Additional Safety for Disc Sanders Availability Power SupplyFull-Load Current Rating Circuit RequirementsExtension Cords Grounding & Plug RequirementsMinimum Gauge Size 50 ftNeeded for Setup SetupInventory UnpackingCleanup Before cleaning, gather the followingBasic steps for removing rust preventative Site Considerations Machine Base Workbench MountingAssemblyTools Needed Qty To assemble the sanderConnecting Power Dust Collection Power ConnectionDisconnecting Power To install the dust collection bagTo test run the machine Test RunOperation Overview OperationsReplacing Sandpaper Disc SandingTo replace the sanding disc Miter slot and work path Rotation To use the disc sanderAccessories Dust Collectors RespiratorsCleaning MaintenanceSchedule LubricationService TroubleshootingMotor & Electrical Workpiece Finish Table Tilt Calibration Miter Gauge CalibrationTo calibrate the miter gauge To calibrate the table tiltWiring Safety Instructions Wiring110 VAC Wiring DiagramMain PartsDescription Main Parts ListLabels Model G0724 Mfg. Since 09/11 Comments Warranty CardBOX BELLINGHAM, WA Grizzly INDUSTRIAL, INCWarranty & Returns Order Hours a DAY