SECTION 3: SETUP
Needed for Setup
The following are needed to complete the setup process, but are not included with your machine.
Description | Qty | |
• | Safety Glasses | 1 |
• | Cleaner/Degreaser | As Needed |
• | Disposable Shop Rags | As Needed |
• | Screwdriver Phillips #2 | 1 |
This machine presents serious injury hazards to untrained users. Read through this entire manu- al to become familiar with the controls and opera- tions before starting the machine!
Inventory
The following is a description of the main compo- nents shipped with your machine. Lay the compo- nents out to inventory them.
If any
Box 1: (Figure 3) | Qty | |
A. | Sander Assembly (Not shown) | 1 |
B. | Miter Gauge | 1 |
C. | Table | 1 |
D. | Table Tilt Lever w/Washer | 1 |
E. | Dust Collection Bag Clamp | 1 |
F. | Dust Collection Bag | 1 |
G. | Hex Wrench 4mm | 1 |
H. | Hex Wrench 5mm | 1 |
I. | Sanding Disc 12" 100 Grit PSA | 1 |
Unpacking
Your machine was carefully packaged for safe transportation. Remove the packaging materials from around your machine and inspect it. If you discover any damage, please call us immediately at (570)
Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult.
B
H
G
I
F
C
D
E
When you are completely satisfied with the condi- tion of your shipment, inventory the contents.
SUFFOCATION HAZARD!
Keep children and pets away from plastic bags or packing materials unpacked with this machine. Discard immediately.