Harbor Freight Tools 46507 manual To Attach The Rubber Backing Plate And Sandpaper

Page 8

To Attach The Rubber Backing Plate And Sandpaper:

1.Caution: Prior to installing the Rubber Backing Plate (part #46), make sure the Polisher/Sander is disconnected from its electrical power source.

2.Rest the tool on a flat surface. Depress the Brake Pin (#18) to keep the Spindle (#3) from turning.

3.Screw the Rubber Backing Plate (46) onto the threaded end of the Spindle (#3) until it is snug. (See diagram below)

4.Ahere Sandpaper Disc (not included) evenly across the Rubber Backing Plate. The Rubber Backing Plate has a self-sticking backing, so be sure only to use Sandpaper Discs with a self-sticking material. Press Sandpaper Disc firmly onto pad. When finished, release pressure on the Brake Pin (#18).

5.When finished sanding, peel the Sandpaper Disc away from the Plate. RUBBER BACKING PLATE (#46)

SANDPAPER DISC

SPINDLE (#3)

BRAKE PIN (#18)

SKU 46507

PAGE 7

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Assembly Operating Information POLISHER/SANDERSave this Manual Specifications TableGeneral Safety Warnings and Precautions Specific Product Warnings and Precautions Industrial Applications Must Follow Osha RequirementsRequired Extension Cord Gauge Figure aUnpacking Assembly Instructions To Attach The Polishing Disc And Wool CoverOperating Instructions To Attach The Side HandleTo Attach The Rubber Backing Plate And Sandpaper INSPECTION, MAINTENANCE, and Cleaning Assy. DiagramPlease Read the Following Carefully Parts List For Polishing Arbor Nut 5/8 11 TPI For Sanding
Top Page Image Contents