|
| Specifications |
|
|
|
|
|
| Motor | 120 V~, 60 Hz, 600 watts, n0 10,000/min |
|
| Belt Speed | 2300 FPM (feet per minute) (single speed); |
|
|
| Gear driven |
|
| Sanding Area | 1/2 (W) x 5 (L) Inches |
|
| Pivot Head | Adjustable 180° |
|
| Line Cord | Two prong polarized, 8 feet, 9 inches long |
|
| Overall Dimensions | 11 (L) x | 230677 |
|
| sanding head |
|
| Weight | 4.8 lb. |
|
| Accessories | 5 – Sanding Belts |
|
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.
General Safety Rules
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
Work Area
1.Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
3.Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed.
Electrical Safety
4.Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded.
5.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
REV 09/06
SKU 92158 | For technical questions, please call | Page |