Symbology
|
|
|
|
| Double Insulated |
|
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Canadian Standards Association |
|
|
|
|
|
|
|
|
|
|
|
|
| Underwriters Laboratories, Inc. |
|
|
|
|
|
|
|
|
| V~ | Volts Alternating Current |
| |||
|
| A | Amperes |
| ||
|
|
|
|
|
| |
|
|
|
|
|
|
|
| n0 xxxx/min. | No Load Revolutions per Minute (RPM) |
| |||
|
|
|
|
|
|
|
|
|
|
|
| Unpacking | |
When unpacking, check to make sure that all the parts are included. Refer to the Assembly Drawing and Parts List at the end of this manual. Not shown are five accessory Sanding Belts.
If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
Assembly Instructions
WARNING! Make sure the Power Switch of the Tool is in its Off (O) position and that the tool is unplugged from its electrical outlet before performing any assembly, inspection, maintenance, or cleaning procedures.
Installing the Sanding Belt
1.Remove Screw (26) and Cover (23). Refer to the photos on the next page.
2.Turn the Slide Lock (36) completely to one side.
This reduces the tension on the Roller (65) so that the Sanding Belt (66) can be slipped over easily.
3.Place the Sanding Belt (66) over the Roller (65) and the Spindle (24).
SKU 92158 | For technical questions, please call | Page |