PRODUCT SPECIFICATIONS
Item | Description |
Electrical Requirements | 110V / 60 Hz / 1/2 HP / 1720 RPM / Single Phase. |
Sanding Belt Size | 4” x 36”. |
Sanding Disc Size | 6” Diameter. |
Sanding Belt Speed | 1125 FPM (Feet Per Minute). |
Sanding Disc Speed | 1720 RPM (Revolutions Per Minute). |
Table Surface Dimensions | |
Table Tilt Capability | 0º - 45º. |
Additional Features | Miter Gauge / Adjustable Backstop. |
Accessories | Hex Key. |
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List on page 19 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1.Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks
SKU 05154 | PAGE 2 |