SYMBOLOGY
Double Insulated
Canadian Standards
Association
Underwriters
Laboratories, Inc.
V ~ | Volts Alternating Current |
A | Amperes |
|
No Load Revolutions
noxxxx/min. per Minute (RPM)
FIGURE D
SPECIFIC SAFETY RULES
1.Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace. Always keep the work area free of obstructions, grease, oil, trash, and other debris. Do not use the Sander in areas near flammable chemicals, dusts, and vapors.
2.Maintain labels and nameplates on the Sander. These carry important infor- mation. If unreadable or missing, contact Harbor Freight Tools for a replacement.
3.Never plug the Power Cord of this product into an electrical outlet while standing on a wet or damp surface.
4.Do not unplug the Sander by pulling on the Power Cord. Keep the Power Cord away from heated surfaces.
5.Use eye and breathing protection. Always wear ANSI approved safety impact eye goggles and dust masks or an approved respirator.
6.Always turn off the Sander and unplug the unit from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
7.Never leave the Sander unattended when it is plugged into an electrical outlet. Make sure to unplug it from its electrical outlet before leaving the area.
8.Do not allow children to handle or play with this product.
SKU 05154 | PAGE 8 |