Jet Tools 16-32 Plus operating instructions Introduction Specifications

Page 6

Introduction

This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures for a JET Model 16-32 Plus Drum Sander. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance with instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site: www.wmhtoolgroup.com.

Specifications

 

Stock Number

629004K

Model Number

16-32 Plus

Maximum Sanding Width (in.)

32 (two passes)

Minimum Sanding Length (in.)

2-1/4

Maximum Thickness (in.)

3

Minimum Thickness (in.)

1/32

Overall Dimensions (HxWxD)(in.)

18 x 23 x 32

Drum Dimensions (dia.x L)(in.)

5 x 16

Drum Speed (RPM)

1725

Drum Bearing Diameter (in.)

1

Dust Port Diameter (in.)

4

Conveyor Motor

43-in.-lbs. torque, direct drive, DC

Conveyor Variable Feed Rate (RPM)

0 to 10

Motor

TEFC, 1.5HP, 1Ph, 110V

Net Weight (lbs.)

164

The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, WMH Tool Group reserves the right to change specifications at any time and without prior notice, without incurring obligations.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Drum Sander Warranty and Service Table of Contents Page Page Introduction Specifications Features and Terminology Contents of Boxes UnpackingCasters Optional Accessory Assembling the StandInstalling Drum Head Installing ConveyorAssembling the Sander Accessory Infeed/Outfeed Tables OptionalInstalling Abrasives Dust CollectionPage Grounding Instructions Extension Cords AdjustmentsSwitch Lock Drum Height ControlConveyor Belt Replacement Dust Cover LatchConveyor Belt Tension/Tracking Sanding Drum Alignment Drum Height Control Adjustment Fine-Tuning Drum AlignmentTension Roller Pressure Adjustment Tension Roller AlignmentOperation Multiple-Piece Sanding Runs Sanding Multiple Pieces At OnceTracker Kit Underside of conveyor shownMaintenance TroubleshootingAlign shaft flats of gear motor Abrasives Abrasive Selection GuideOptional Accessories Replacement PartsParts List Stand Assembly Index No. Part No Description Size QtyConveyor and Motor Assembly Parts List Conveyor and Motor Assembly Drum Head Assembly Parts List Drum Head Assembly JWTS10-MRSParts List Infeed/Outfeed Tables Optional Accessory Electrical Connections Page Page WMH Tool Group
Top Page Image Contents