Delta (Model 31-695) Adjusting Backstop Square with Sanding Belt, Tilting the Table

Page 12

2.Place a level (A) on the sanding belt.

3.To adjust, loosen the lock nut (B) Fig. 21, and turn the sanding arm stop (C) in or out until the sanding arm is level. After adjustment, tighten the lock nut

(B).

ADJUSTING BACKSTOP SQUARE WITH SANDING BELT

DISCONNECT MACHINE FROM POWER

SOURCE.

1.Before making this adjustment, check to see that the belt tension lever (A) Fig. 22 is all the way to the left in the “tighten” position.

2.Place a square (B) Fig. 23 on the sanding belt with the end of the square against the backstop.

3.If the backstop is not square with the sanding belt, loosen the two screws (C) Fig. 23, and adjust the backstop. After adjusting, tighten the screws (C).

TILTING THE TABLE

DISCONNECT MACHINE FROM POWER

SOURCE.

You can tilt the table 45 degrees by loosening the table lock knob (A) Fig. 24. Tighten the table lock knob after tilting the table. A scale (H) is provided with a pointer (G) to help you accurately tilt the table to the desired angle.

After tilting, the table assembly must be repositioned on the support rod (B) FIG. 24 to provide a maximum of 1/16" distance between the sanding disc (C), and the edge (D) of the table, to avoid trapping the workpiece or fingers between the disc and table. To reposition the table assembly, loosen two screws (E) and/or screw (F), move table assembly on rod (B), and tighten screws (E) and/or (F).

B A

C

Fig. 21

A

Fig. 22

F

C

B

Fig. 23

D

C

 

 

G

 

H

F

A

B

 

E

Fig. 24

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Belt / 9 Disc Sander Safety Guidelines Definitions General Safety RulesImportant Safety Instructions General Safety Rules Stay ALERT, Watch What YOU are DOING,Additional Safety Rules For Abrasive Finishing Machines Failure to Follow These Rules MAY Result in Serious InjuryPower Connections Motor SpecificationsGrounding Instructions Unpacking and Cleaning Carton ContentsExtension Cords Functional DescriptionAC D E Assembly Drive BELT/ Adjusting Belt TensionStand Machine to StandBelt and Pulley Guard Sanding Disc PlateSanding Disc to Disc Plate Operating Controls and Adjustments Lower Cover for Sanding DiscSander Table Starting and Stopping SanderLocking Switch in the OFF Position Adjusting Sanding ARM StopTracking the Sanding Belt Changing Position of Sanding ARMAdjusting Backstop Square with Sanding Belt Tilting the TableAdjusting Miter Gauge Slot Parallel with Sanding Disc Accessory Miter GaugeSquaring Table with Sanding Disc Using Table Assembly with Sanding Belt Adjusting Dust ShieldDust Spout Wrench Storage Removing Upper Sanding Drum GuardReplacing Sanding Belt Replacing Sanding Disc Sanding BeltSanding Inside Curves Sanding Outside CurvesSurfacing or Edge Sanding with Sanding Belt Assembly with Sanding Belt END Sanding with the DiscEND Sanding Wide Workpieces with the Belt Maintenance Keep Machine CleanPARTS, Service or Warranty Assistance AccessoriesCanadian PORTER-CABLE Delta Service Centers

(Model 31-695) specifications

The Delta Model 31-695 is a versatile and high-performance table saw that caters to both serious hobbyists and professional woodworkers. Combining power, precision, and ease of use, this model stands out with its impressive features and advanced technology.

At the heart of the Model 31-695 is its robust motor, which typically boasts a 1.75 to 2 horsepower power output, allowing it to tackle tough materials with ease. This feature makes it capable of handling a wide range of cutting tasks, from fine cabinetry to thicker hardwoods, ensuring smooth and accurate cuts every time. Additionally, the saw usually operates at a standard voltage, making it compatible with most shop setups.

The table saw features a durable cast iron table that provides excellent stability and minimizes vibrations during operation. Its expansive surface area allows for larger workpieces, making it ideal for various woodworking projects. The table is often coated with a smooth finish to ensure easy sliding of materials and improved accuracy.

One of the standout features of the Delta Model 31-695 is its precision fence system. Typically, this model is equipped with a rip fence that can be easily adjusted for accuracy and features a locking mechanism that keeps it securely in place during cuts. This ensures consistent and repeatable results, which is crucial for any serious woodworker.

Moreover, the saw usually incorporates a blade guard and anti-kickback pawls to enhance user safety. These components help prevent accidents and ensure that the material remains stable during cutting, giving users peace of mind while they work.

Another key aspect of this model is its dust collection system. Designed to keep the workspace clean, the integrated port allows for efficient extraction of sawdust and debris during operation, contributing to a healthier work environment.

In terms of versatility, the Model 31-695 often offers a variety of blade angle adjustments, allowing users to perform bevel cuts and miters effortlessly. This adaptability makes it suitable for a multitude of cutting techniques and different woodworking styles.

In summary, the Delta Model 31-695 combines power, stability, and safety features to provide woodworkers with an exceptional tool. Its robust motor, precision fence system, safety mechanisms, and efficient dust collection contribute to making it a reliable choice for anyone looking to enhance their woodworking experience.
Top Page Image Contents