Delta (Model 31-695) Belt and Pulley Guard, Sanding Disc Plate, Sanding Disc to Disc Plate

Page 9

BELT AND PULLEY GUARD

Place an M6.4 lockwasher and an M6.4 flat washer in that order on two M6 x 55mm hex socket head screws (B), and attach the belt and pulley guard (A) Fig. 8 to the machine. NOTE: Install the plug (C) in the guard.

SANDING DISC PLATE

1.Place the key (C) Fig. 9 into the keyway of the driveshaft and slide the sanding disc plate (A) Fig. 9 on the drive shaft until it is flush with the end of the drive shaft (Fig. 10).

NOTE: Do not allow the drive shaft (B) to extend past the plate surface.

2.Insert a hex wrench (E) Fig. 11 through the slot (F) in the back of belt and pulley guard (G). Tighten the set screw that holds the disc plate on the drive shaft.

Fig. 10

SANDING DISC TO DISC PLATE

1.Clean the sanding disc plate (A) Fig. 12.

2.Peel the backing from the sanding disc (B) Fig. 12. Press the disc firmly into position on the sanding disc plate (A).

Fig. 8

Fig. 9

Fig. 11

Fig. 12

Image 9

Contents Belt / 9 Disc Sander Safety Guidelines Definitions General Safety RulesImportant Safety Instructions Stay ALERT, Watch What YOU are DOING, General Safety RulesFailure to Follow These Rules MAY Result in Serious Injury Additional Safety Rules For Abrasive Finishing MachinesPower Connections Motor SpecificationsGrounding Instructions Carton Contents Unpacking and CleaningExtension Cords Functional DescriptionAC D E Drive BELT/ Adjusting Belt Tension AssemblyStand Machine to StandBelt and Pulley Guard Sanding Disc PlateSanding Disc to Disc Plate Lower Cover for Sanding Disc Operating Controls and AdjustmentsSander Table Starting and Stopping SanderAdjusting Sanding ARM Stop Locking Switch in the OFF PositionTracking the Sanding Belt Changing Position of Sanding ARMTilting the Table Adjusting Backstop Square with Sanding BeltAdjusting Miter Gauge Slot Parallel with Sanding Disc Accessory Miter GaugeSquaring Table with Sanding Disc Using Table Assembly with Sanding Belt Adjusting Dust ShieldDust Spout Wrench Storage Removing Upper Sanding Drum GuardReplacing Sanding Belt Sanding Belt Replacing Sanding DiscSanding Inside Curves Sanding Outside CurvesSurfacing or Edge Sanding with Sanding Belt Assembly with Sanding Belt END Sanding with the DiscEND Sanding Wide Workpieces with the Belt Keep Machine Clean MaintenanceAccessories PARTS, Service or Warranty AssistanceCanadian PORTER-CABLE Delta Service Centers

(Model 31-695) specifications

The Delta Model 31-695 is a versatile and high-performance table saw that caters to both serious hobbyists and professional woodworkers. Combining power, precision, and ease of use, this model stands out with its impressive features and advanced technology.

At the heart of the Model 31-695 is its robust motor, which typically boasts a 1.75 to 2 horsepower power output, allowing it to tackle tough materials with ease. This feature makes it capable of handling a wide range of cutting tasks, from fine cabinetry to thicker hardwoods, ensuring smooth and accurate cuts every time. Additionally, the saw usually operates at a standard voltage, making it compatible with most shop setups.

The table saw features a durable cast iron table that provides excellent stability and minimizes vibrations during operation. Its expansive surface area allows for larger workpieces, making it ideal for various woodworking projects. The table is often coated with a smooth finish to ensure easy sliding of materials and improved accuracy.

One of the standout features of the Delta Model 31-695 is its precision fence system. Typically, this model is equipped with a rip fence that can be easily adjusted for accuracy and features a locking mechanism that keeps it securely in place during cuts. This ensures consistent and repeatable results, which is crucial for any serious woodworker.

Moreover, the saw usually incorporates a blade guard and anti-kickback pawls to enhance user safety. These components help prevent accidents and ensure that the material remains stable during cutting, giving users peace of mind while they work.

Another key aspect of this model is its dust collection system. Designed to keep the workspace clean, the integrated port allows for efficient extraction of sawdust and debris during operation, contributing to a healthier work environment.

In terms of versatility, the Model 31-695 often offers a variety of blade angle adjustments, allowing users to perform bevel cuts and miters effortlessly. This adaptability makes it suitable for a multitude of cutting techniques and different woodworking styles.

In summary, the Delta Model 31-695 combines power, stability, and safety features to provide woodworkers with an exceptional tool. Its robust motor, precision fence system, safety mechanisms, and efficient dust collection contribute to making it a reliable choice for anyone looking to enhance their woodworking experience.