NOTE: Only those dust masks suitable for working with lead paint dust and fumes should be used. Ordinary painting masks do not offer this protection. See your local hard- ware dealer for the proper (NIOSH approved) mask.
•NO EATING, DRINKING or SMOKING should be done in the work area to pre- vent ingesting contaminated paint parti- cles. Workers should wash and clean up BEFORE eating, drinking or smoking.
Articles of food, drink, or smoking should not be left in the work area where dust would settle on them.
•ENVIRONMENTAL SAFETY
•Paint should be removed in such a manner as to minimize the amount of dust generated.
•Areas where paint removal is occurring should be sealed with plastic sheeting of 4 mils thickness.
•Sanding should be done in a manner to
reduce tracking of paint dust outside the work area.
•CLEANING AND DISPOSAL
•All surfaces in the work area should be vacuumed and thoroughly cleaned daily for the duration of the sanding project. Vacuum filter bags should be changed frequently.
•Plastic drop cloths should be gathered up and disposed of along with any dust chips or other removal debris. They should be placed in sealed refuse receptacles and disposed of through regular trash
•All toys, washable furniture and utensils used by children should be washed thoroughly before being used again.
SAVE THESE INSTRUCTIONS
ASSEMBLY / ADJUSTMENT SET-UP
WARNING: Always unplug tool from power supply before any of the following operations.
MOTOR
Be sure your power supply agrees with name- plate marking. 120 Volts AC only means your tool will operate on standard 60 Hz household power. Do not operate AC tools on DC. A rat- ing of 120 volts AC/DC means that your tool will operate on standard 60 Hz AC or DC power. This information is printed on the nameplate. Lower voltage will cause loss of power and can result in
All BENCHTOP® tools are
center it over the sanding pad ensuring that the holes in the disc align with the holes in the pad and press the disc firmly in place.
The hook and loop fastening system sanding disc can be easily removed by simply pulling it off. It can be reused as desired.
ATTACHING HOOK AND LOOP
SANDING DISCS
Your sander is designed to use 5” (127mm) sanding discs with the 8 hole dust extraction pattern. To attach the sanding disc, carefully
IMPORTANT! READ ALL INSTRUCTIONS!
7