Schumacher MSC-2405 owner manual Assembly instructions No assembly required, Product Features

Page 9

9.assembly instructions No assembly required.

10.PRODUCT FEATURES

1

4

2

3

1.Charger Status LEDs (located on side of unit)

2.Battery Clamp Output Cord

3.30 Pin XLR 3-12C Output Cord

4.3/8” Dia. Ring Terminal Output Cord

11.mounting charger to a flat surface

Do not mount charger in a location with restricted air flow. The area where the charger is to be fastened must be dry, well ventilated and away from any combustible material and fumes.

11.1Turn off and disconnect charger.

11.2Place the back of the charger with mounting bracket against a secure, flat surface.

11.3Securely mount charger to a flat surface with a minimum of one and a half inches of clearance on each side.

7

Image 9
Contents Voltage Amperage Trademark Acknowledgements Trademark AcknowledgementsWorking in the Vicinity of a LEAD-ACID Battery is Danger Important Safety InstructionsPage DC Connection Precautions Preparing to ChargeCharger Location Page Page Battery charging ac connections Product Features Assembly instructions No assembly requiredOperating instructions Control panelCalculating charge time Specific Gravity Percent of Charge NeededExample Troubleshooting Maintenance instructionsLED GUIDE/PROBLEM Possible Cause Solution Storage instructionsElectrical Technical specificationsMechanical ConnectionsReplacement parts Limited Warranty