ASSEMBLY
ASSEMBLY
TAILWHEEL ASSEMBLY - LIFT
1.Attach Bracket (3) into Support Beam (8) and
attach to Frame Assembly with Bolts (4) & Locknuts (5).
2.Slide the Beam Weldment (2) through Bracket
(3)and Support Beam (8) and attach to Mower Deck using Bolt (4) and Locknut (5).
3.Insert Tailwheel Beam (2) through Bracket (3) and Support Beam (8). Install to Gearbox Lug through pair of holes which will give approximate desired cutting height using Bolt
(7)and Locknut (6).
TONGUE
Attach clevis weldment (3) to tongue weldment (1) using bolt (11), and locknut (12). Then attach tongue weldment (1) to mower deck lugs with pin (6), bushing (8), and secure with locknut (9). Make sure that jack mount tube (5) and (4) are attached to tongue and deck lugs. Attach parking jack (15) to mount tube (5) when in storage and (4) when in operation or transport. Note: Attach Safety Chain (27) to Tongue when in transport.
Figure Asm-R-0285.
TURBO 96 01/11 | Assembly Section |
© 2011 Alamo Group Inc.